Noh Ironogi Spotting Scopes

Trigger Guard Mount

Loading Dock Lifts

Loading dock lifts are intended to reduce man-hours and improve safety where there are no loading dock facilities. A lift raises materials to the truck by means of hydraulic cylinders. Loading dock lifts are engineered for maximum safety, minimize the risk of injury, and vastly improve time to market efficiency. Each unit features easy to use controls in the form of a push button, 24V AC on a 20 foot long coil cord. The pre-wired control box includes a magnetic starter and overload fuse, and an emergency velocity fuse stops momentum in the event of a line break.

Loading dock lifts also feature high visibility, removable handrails with fixed toe boards. The checkered deck plate on each unit is made from heavy gauge steel and will last for many years. The perimeter of the platform is surrounded by beveled toe-guards and electric toe-guards to prevent slips and falls. The electric toe-guard is a patented feature that is essential to the safety of personnel. It is made from L-shaped aluminum extrusion and hangs below the entire perimeter of the deck. This is important, because if the loading dock lift is being lowered while an object, hand, or foot crosses its path, the guard will be triggered and the unit will electrically stop the table from lowering. When the object is removed, the table once again begins to move. It is not necessary to reset the unit.

Toe-guard provisions are standard OSHA and ANSI safety measures used on a variety of platforms and are also built into the loading dock lift for compliance protocol. The scissor table loading dock lift is also semi-portable, and can be operated up to 8 feet away from the 6.5 HP motor that drives it.

Manufacturers can also customize loading dock lifts with any number of options requested at the time of purchase. These options include, but are not limited, to the following:

SPLIT ALUMINUM TRUCK BRIDGE

The standard steel bridge can be replaced with an aluminum bridge measuring 72" wide x 18" long. This is ideal for government applications.

SPLIT STEEL BRIDGE

If necessary, an additional 72" wide x 18" long split steel bridge can be added to the opposite side of unit.

REMOVABLE HANDRAILS/TOEBOARDS

This is advantages when the unit is mounted in a pit. The additional handrails and toe boards allows the loading dock lift to be flush with the floor for fork truck cross traffic.

WARNING BEEPER & STROBE

In areas of heavy human traffic, this offers an added safety precaution. The beeper sounds at 80 decibels- loud enough to be heard over most light machinery.

ADDITIONAL APPROACH RAMPS

Your vendor can also fit the loading dock lift with additional approach ramps and hydraulic lines. Approach ramps can be obtained from your vendor for lowered height lifts of 8"-12", depending on the size of the added ramp. Approach ramps must be anchored to the floor.

ADDITIONAL STRUCTURAL CHANNEL AND SUPPORTS FOR DECK

Ideal for heavy duty construction, this increases the rollover capacity of the loading dock lift up to 50,000 lbs., (25,000 lbs. per axle).

SAFETY ACCORDION SKIRTS

Keep people and debris from getting under the loading dock lift. We recommend customer installed skirts to avoid freight damage.

AUTOMATIC WHEEL CHOCKS

As the unit lifts, this option will block the dock end of the ramp to avoid roll off. Wheel clocks require a special pit mount.

STOP SIGNAL SIGN

As the truck approaches the loading dock lift, the sign raises to let the driver know when to stop for safe loading/unloading.

KEY LOCK OPERATION

This prevents unauthorized use of the lift by locking out the controls.

TWO SPEED PUMP

Increase lifting speed by 55% when lift is unloaded. This is ideal for unloading applications.

2-10HP OPTIONAL POWER UNITS

Ask your manufacturer's representative about which motor will work best for your operation. Both internal and external power units are available.

SPECIAL COATINGS

Cold galvanized coating is designed for wash down applications and wet environments. STEEL-IT™ COATING is designed for incidental food contact and wash down environments. FDA approved.

OIL HEATER

This accessory keeps the loading dock lift operating smoothly in extreme cold. The unit is supplied with a thermostat for automatic heat control.

About the Author

Easyrack.org. For more information on
Loading Dock Lifts
visit the
Loading Ramps and Dock Boards
section on our website.

LED Flashlight for Trigger Guard Mount $39 Product Features: Constructed of Hard Anodized Aluminum 1 Watt Bright LED 35 Lumens Peak Output Designed To Fit on Most Pistol, Rifle, Or Shotgun Trigger Guard Easy Twist On/Off Design Uses 1 Cr123a Lithium Battery Length: 4.1 Inches Width: 1.0 Inches Weight: 2.3 Ounces with Battery

Ncstar Apfs Ncstar Led Flashlight For Trigger Guard Mount $39.15 One problem of pistols without Integrated Picatinny Accessory Rails is that mounting a flashlight can prove to be difficult. NcSTAR has your solution. Introducing the New Trigger Guard Mounted Flashlight. This 1 Watt 35 Lumen Flashlight will mount to virtually any trigger guard making this unit Extremely Versatile This Flashlight can also be mounted to Rifles and Shotguns as well Powered by one CR123A Battery (Included) and comes equipped with all necessary Mounting Hardware.

Firefield FF13039 Red Laser Sight with Pistol Trigger Guard Mount $34.58 The Yukon Advanced Optics FF13039 Red Laser Pistol Sight with Pistol Trigger Guard Mount featuring a crisp bright laser beam with a visibility range of 60 (18.28 m) in daylight and up to 900 (274.32 m) at night allows you to quickly and accurately zeroin on your intended target. In spite of being lightweight at 0.06 lb (0.02 kg) the compact 3.8 (9.65 cm) pistol sight features a shockproof design for rugged usage. Projects a crisp bright laser beam. Visibility range up to 60 (18.28 m) in daylight and up to 900 (274.32 m) at night. Enables quick and accurate zeroing in on the intended target. Lightweight 0.06 lb (0.02 kg) and compact 3.8 (9.65 cm) design. Shockproof construction for rugged usage. Includes a Weaver mount and Pistol Trigger Guard mount.

Nc Star Apfs Led Flashlight For Trigger Guard Mount $39.15 Features:. 1 Watt 35 Lumen flashlight. Trigger Guard Clamp fits most pistol trigger guards. Easily turns on with a twist of the Flashlight body. Specifications:. Flashlight: 1 watt LED. Power output: 35 lumens. Battery type: CR123A Lithium (requires 1) included. Length: 4 1 . Bezel diameter: 1 . Body width: 83 . Anodized aluminum construction.

Nc Star Acls Red Laser Sight With Universal Barrel Trigger Guard Mount Combo SetBlack $32.4 All Aluminum Construction. 635655nm Red Laser Beam

Black Red Laser Sight With Trigger Guard Mount $29.99 Product Features: All Aluminum Construction 635-655nm Red Laser Beam

Dead On A5 2 Finger Trigger With Guard $10 The double trigger kit is a drop-in kit that replaces the single trigger and trigger guard. The kit includes a double trigger and a tournament legal trigger guard.

RhythmTech RT7960 Trigger Triangle Mount $11.99 RhythmTech RT7960 Trigger Triangle Mount

Rhythmtech Rt7960 Trigger Triangle Mount $11.99 RhythmTech RT7960 Trigger Triangle Mount

Proto PMR Edge Trigger Guard Red $9.95 Description The Proto Edge Guard is an aluminum replacement to the stock plastic Rail trigger guard. It is stylishedly milled and has superior durabililty over the stock trigger guard.

Proto PMR Edge Trigger Guard Clear $9.95 Description The Proto Edge Guard is an aluminum replacement to the stock plastic Rail trigger guard. It is stylishedly milled and has superior durabililty over the stock trigger guard.

Firefield Red Laser Sight With Pistol Trigger Guard Mount Black FF13039 $19.99 Fire Field Red Laser Pistol Sight is a compact small laser that has a base weaver mount, and comes with a 5mw red laser. The Mini Red Laser Sight FF13039 is lightweight & compact optical device. The Firefield sight emits a beam visible at 20 yards range in the daytime and up to 300 yards at nighttime. It also features both wind & elevation adjustments, rapid target acquisition, durable and shockproof housing. The FireField Red Laser Sight FF13039 includes a gun sight mounting kit, 2 allen wrenches and 3 LR-44 Batteries.

Ncstar Apls Ncstar Red Laser Sight with Trigger Guard Mount Black $27 Knowing your target and what is beyond it is one of the most important aspects of shooting. Shed a little light on the darkness with NcSTAR Flashlights amp;amp; Lasers. All of our Flashlights amp;amp; Lasers are light weight and compact in design for extraordinary mobility without getting snagged on any obstructions. Whether you re an Officer fighting crime on the streets a Soldier on the front lines or a Home Owner protecting your family you can trust NcSTAR to illuminate the world around you. Specifications: All Aluminum Construction. 635655nm Red Laser Beam amp;lt;5mw. Universal Barrel Mount fits most Rifle Barrels. Standard on/off cap switch. Includes 3 AG13 Lithium type batteries and mounting tool. Dimensions (inches): 2.42Lx .58W. Weight: 0.70 oz. with batteries

Ncstar APLSS Ncstar Red Laser Sight With Trigger Guard Mount Silver $28.35 Knowing your target and what is beyond it is one of the most important aspects of shooting. Shed a little light on the darkness with NcSTAR Flashlights amp; Lasers. All of our Flashlights amp; Lasers are light weight and compact in design for extraordinary mobility without getting snagged on any obstructions. Whether you\ re an Officer fighting crime on the streets a Soldier on the front lines or a Home Owner protecting your family you can trust NcSTAR to illuminate the world around you. Specifications: All Aluminum Construction. 635655nm Red Laser Beam lt;5mw. Universal Barrel Mount fits most Rifle Barrels. Standard on/off cap switch. Includes 3 AG13 Lithium type batteries and mounting tool. Dimensions (inches): 2.42Lx .58W. Weight: 0.70 oz. with batteries

Magpul Industries MAG015 Aluminum Enhanced Trigger Guard $32.21 The Enhanced Trigger Guard is an aluminum drop in replacement for the AR15/M16 weapons platform. It features a shallow V shape for better use of gloves in tactical shooting or cold weather operations. The Enhanced Trigger Guard is nonfolding has rounded edges and fills the annoying gap at the rear of the standard trigger guard. Compatible with most AR15/M16 and AR10/SR25 styles of receivers. Due to variances in manufacturer specs some rifles may require some slight adjustments to the Trigger Guard for proper fit. Made with durable black anodized aluminum alloy. Finish: Black. Fit: AR15. Type: Grip.

Trigger $9.49 Trigger

Nc Star Apls Red Laser Sight With Trigger Guard MountBlack $27 All Aluminum Construction. 635655nm Red Laser Beam

TechT A5 Fang Trigger Black $44.99 Techt's most popular A5 Trigger. This Aluminum trigger includes a new guard and is perfect for semi-auto, response trigger and especially A5 guns with E-grip.

Tippmann A5 Double Trigger Kit $19 Description The double trigger kit is a drop-in kit that replaces the single trigger and trigger guard. The kit includes a double trigger and a tournament legal trigger guard. To install the double trigger simply remove all gas sources and disassemble the marker to the point of removing the left half of the markers receiver. Remove the single trigger and guard. Then replace with the double trigger and guard. Now replace the receiver half. It's that simple! This is a genuine Tippmann Accessory. Attention A-5 double trigger is not compatible with the Selector Switch Egrip, Selector Switch Response Trigger, or Response Trigger. Must use the X-7 double trigger for these models.

Trigger Lock Mount Kit-Batwing $137.95 Memphis Shades Trigger Lock Mount Kit-Batwing Exclusive No-Tool Trigger-Lock mount kits feature a detach system that allows you to quickly and easily remove or install your fairing Trigger-Lock kits are a combination of CNC machined, black E-coated aluminum plates, gray polymer bushings and glass filled nylon latches making it durable and stylish This mounting kit is for use with the Batwing Fairing by Memphis Shades **Note: Actual product may vary from image depending on year, make and model of bike

CHIEF / MOUNT, PROJECTOR GUARD / PG1A $284.41 CHIEF - MOUNT, PROJECTOR GUARD - PG1A

3Skull Tippmann X7 X-7 Double Paintball Trigger & Guard $12.95 Description Increase your trigger speed with the X7 Double Trigger. Ergonomic design helps prevents fatigue.This trigger is also used for the A-5 H.E Egrip.

Sportshield Trigger Mount Kit $137.95 Sportshield Trigger Mount Kit from Memphis Shades Gone are the days of fumbling with tools to remove your Memphis Fats, Slims, and Sportshields Kits feature a detach system that allows you to quickly and easily remove your windshields without the use of any tools A pair of latches lock the windshield down until the spring loaded "trigger locks" are intentionally disengaged, allowing the rider to remove the windshield Kits are a combination of CNC-machined aluminum plates, stainless steel bolts and aluminum anchors Kits are custom-fit to each style of bike for a truly no-hassle installation **Note: The following models require Turn Signal Relocation Kit. Click Here to Select Your Application Honda VT750C Magna '94-04 Kawasaki Vulcan 1500 '88-99 Vulcan 1500 L '96-99 Yamaha Virago 750 '85-99 Virago 1100 '85-99 Virago 1100 Special '97-99 **Note: The following models must use windshield with 9" headlight cutout Honda Shadow 750 ACE Deluxe '98-03 Shadow 1100 Sabre '00-08 VTX1300S/R '03-08 VTX1800C/R '02-08 Kawasaki Vulcan 900 Classic '06-08 Vulcan 900 Custom '07-09 Suzuki Intruder 800 Volusia '01-08 C50 '01-08 Yamaha Roadliner 1900 '06-08 **Note: Mounts are bike specific and may vary from image

Simmons Piezo Drum Trigger $19.99 The Simmons Piezo Drum Trigger enables you to trigger electronic drum sounds, effects, and loops with an acoustic drum. It easily mounts to any drumhead to trigger any electronic drum module. A trigger hat and insulated rim jack mount clip come included. (Electronic drum module not included)

Black Red Laser Sight With Universal Barrel and Trigger Guard Mount Combo Set $39.99 Product Features: All Aluminum Construction 635-655nm Red Laser Beam

Ncstar Acls Ncstar Red Laser Sight with Universal Barrel amp; Trigger Guard Mount Combo Set Black $32.4 Knowing your target and what is beyond it is one of the most important aspects of shooting. Shed a little light on the darkness with NcSTAR Flashlights amp; Lasers. All of our Flashlights amp; Lasers are light weight and compact in design for extraordinary mobility without getting snagged on any obstructions. Whether you re an Officer fighting crime on the streets a Soldier on the front lines or a Home Owner protecting your family you can trust NcSTAR to illuminate the world around you. Specifications: All Aluminum Construction. 635655nm Red Laser Beam . Please Note: Includes one laser

Pintech Acoustic Drum Trigger with Trigger Trap $25.6 The Pintech Acoustic Drum Trigger may be the number one selling drum trigger in the world. Mount the trigger on either the head or the shell for excellent sensitivity and response. Kwik Klip mounting system ensures that the audio jack stays in place. The Pintech trigger fastens to any tension rod without adhesives. Pintech's exclusive mounting disc allows the floating chamber to move freely with the drum head without marring it.

Knights Armament 20491 AR15M4 Aluminum Combat Trigger Guard $42.25 Kac Aluminum Combat Trigger Guard. Finish: Black. 100 Safe and secure shopping. Superior customer service. High quality with reasonable price. Our most popular model. Very exquisite and beautiful design.

Trigger Lock Mount Kit for Bullet Fairing $142.95 Trigger Lock Mount Kit for Bullet Fairing Exclusive No-Tool Trigger-Lock mount kits feature a detach system that allows you to quickly and easily remove or install your fairing Trigger-Lock kits are a combination of CNC machined, gray polymer bushings and glass filled nylon latches making it durable and stylish This mounting kit is for use with the Bullet Fairing

Pintech Acoustic Drum Trigger With Trigger Trap $25.6 The Pintech Acoustic Drum Trigger may be the number one selling drum trigger in the world. Mount the trigger on either the head or the shell for excellent sensitivity and response. Kwik Klip mounting system ensures that the audio jack stays in place. The Pintech trigger fastens to any tension rod without adhesives. Pintech's exclusive mounting disc allows the floating chamber to move freely with the drum head without marring it.Head- or shell-mountedKwik Klip mounting systemMounting disc allows free-floating chamber to move with drum headWon't mar heads

Westin Sportsman; Winch Mount Grille Guard $592.99 Sportsman; Winch Mount Grille Guard; Black; Steel;

Kingman Spyder Replacement Metal DOUBLE Trigger & Guard Set Classic Sonix Victor Gun java $6.99 This is one (1) Kingman Paintball factory replacement Double Trigger and Trigger Guard Set. Fits all mechanical Spyder markers after 1998 including the mechanical Sonix, Special Edition, Compact and most other single or double trigger models. Both components are all metal with a durable black finish. The steel double trigger comes with the spring loaded sear latch installed. Fits most Spyders without a trigger guard (which must be removed). Guard attaches to the front trigger frame screw and makes your Spyder 'field legal'. Mounting screw and instructions included. NOTE: Only fits on a Paintball marker, NOT a real gun! Type: Double Trigger & Guard Material: Metal Color: As Shown

Pintech Trigger Trap Mounting System $11.9 The Pintech Trigger Trap Mounting System mounts the RS-5 or any other brand of head mount trigger without the use of sticky tapes or adhesives. The Trigger Trap mounts easily on the tension rod. Coated metal construction will endure road use and won't scratch hardware.Coated metal constructionTotally reliableWon't harm hardware