Noh Ironogi Spotting Scopes

Scope Mount Ar 15

You've just got yourself a new rifle scope, fitted it and let me guess...for some reason your shots are landing nowhere near the crosshairs?

Sadly there's more to rifle scope sharp shooting than just plonking the scope on the rifle and forever after shooting like an SAS sniper! You have to "zero" it.

Think about it. It's like a bike wheel. If you tighten the bolts wrong, too much on one side for example, it spins wrong and rubs the brake pads. It's the same with a Rifle scope. If it's not set up correctly it will be offline and even at short air rifle, airsoft and paintball ranges this is going to throw your accuracy right off. At longer ranges you'll miss by a mile (well figuratively anyway!)

What Does "Zero a scope" mean?

Zeroing a sight or scope means getting the crosshair in position so that when you shoot. Ground zero if you like. The point of impact.There's a lot of discussion amongst shooters on the best way to zero a scope or sight. What I've written below is what I've been sending out to my ebay scope buyers for the last year or so and received a lot of good comments back about it so I know it's OK!

How to Zero a Rifle Scope

First of all you need to set a firm foundation by fitting the scope mounts well.

1. Put the scope mounts on the rifle first with the top brackets removed.
2. Tighten them into place using 1/2 turns at the time so that they sit solid and level as best as is possible, i.e., the downward pressure is as equal as possible. At this stage don't tighten them fully as you might want to slide them up and down a little.
3. Now take scope and place it on top of the open rifle mounts.
   • Make sure the windage and elevation turrets are one up and one to the right (these are the "turrets" on the sight. You use them later to make micro adjustments and in the field adjustments for wind)
4. Then put the top mount brackets on and tighten - Again use partial turns to tighten up.
   • Don't tighten fully at this stage, you may yet need to adjust a little.

Zero the scope

1. Lie in your normal shooting position and check that you can see through the scope well...
   • The distance between your eye and the rear scope lens is called Eye Relief.
   • Unlike cartoons you do not use a scope by pressing your eye up against the scope lens!
2. Once comfortable complete the screwing down of all mounts so that your set up is solid -
   • take care at this stage to keep the final turns partial and one by one to ensure pressure is equal.

Now it's time to zero the scope for shooting:

1. Load the rifle
2. Adopt your standard prone/lie down shooting position.
   • Prone is the best way as if you test shoot from standing or kneeling positions you waver more and it's harder to do a "true test".
3. Put some sort of target in place at say 20 yards - or whatever you think your "standard" range will be.
4. Using cross hair on target centre - Take 2-3 shots - Where do do they fall in relation to where you want them to? Right, left, up, down - dead on (lucky you!)

• 2-3 shots is best as it will average out shooter inaccuracy and give you a more "significant" feel for how far or close you are from true zero.

Now it's time to use the windage and elevation turrets to get it zeroed dead on. These are the 2 turrets on the top and right side of the scope. See my website for pictures.

1. Models vary, you'll probably screw a cap off and expose either a coin twist or finger knurled type of dial.
2. The top turret adjusts up and down. The right one left and right.
3. If you have your scopes instructions they should have a table with figures to tell you what each click adjustment means in terms of cross hair movement at "x" distance, e.g., 1/8 inch at 100 metres.

Use single click turns and each time take a new shot to gauge where the shot now falls - the dials basically adjust the cross hair position up-down and left-right.

It's trial and error basically but with testing you'll get to where you need to be and be able to trust that your shots will go where it says they will! This may take some time and a lot of shots. Be patient!

I sell rifle scopes and laser sights on ebay for a living. After getting asked repeatedly for instructions on how to zero scopes I wrote a text file guide to send to people. This had some really good comments back so I decided to use it as the basis for a new website which is about, funnily enough, how to zero rifle scopes (and zero in laser sights, how to go about choosing a new scope and more) See it at http://www.zeroriflescope.co.uk/ and my ebay shop at http://stores.ebay.co.uk/Hunting-Shooting-Fishing

Burris Ar Pepr 1In Scope Mount 410343 $76.29 Burris AR-P.E.P.R. MountProper Eye Position Ready for combat riflescopes, this mount provides 2" of forward scope positioning on the M-4 and AR-15 platform. Ring bases are milled as a single, tough unit, and ring tops feature Picatinny tops for mounting additional accessories. Specifications: Weight: 8.3 oz. Contents: Burris AR-P.E.P.R. Mount. Type: Gun Scopes

Burris Ar Pepr 30Mm Scope Mount 410341 $76.29 Burris 30MM Matte Black Scope Mounts Md: 410341, Proper Eye Position Ready for combat riflescopes, this mount provides 2 inches of forward scope positioning. Ring bases are milled as a single, tough unit and ring tops feature Picatinny tops for mounting additional accessories. Available for 30MM or 1 inch scopes., Type: Scope Mount MFG/Model: AR Proper Eye Position Ready Style: Picatinny Misc: 30MM Finish: Matte Black, Manufacturer: BURRIS COMPANY, Model: 410341. Type: Gun Scopes

AR RISER MOUNT $26.99 Barska’s AR Riser Mount: -Raises mounting platform to 3/8" adding height to attach a scope or optic accessory -Features plenty of slots for maximum scope ring adjustments -Peep sight design allows you to use rifle’s iron sight made from T6 Aluminum -Rail Length: 5.2 inch

Tactical Triple Threat Scope Mount Combo (MTRIF, SC430B, RMB11, DDAB, APTF) $125.95 Product Features: The Tactical Triple Threat Combo will turn your AR Style Rifle into a Lean, Mean, Tactical Machine. Equipped with a fixed Compact 4x30 Scope, Micro Red Dot and Bright 35 Lumen flashlight you will be ready to go wherever the fight takes you. Just attach the Weaver Style AR Tri-Rail to the top of your AR Style flat top and you are ready for action. The Tactical Triple Threat Combo comes complete with AR Tri-Mount, Compact 4x30 Scope, 1� Weaver Style Tri-Rings, Micro Red Dot Sight and LED Flashlight.

Burris 410343 1 in. Matte Black Scope Mounts $113.11 Proper Eye Position Ready for combat riflescopes this mount provides 2 of forward scope positioning. Ring bases are milled as a single tough unit and ring tops feature Picatinny tops for mounting additional accessories. Available for 30MM or 1 scopes. Type: Scope Mount. MFG/Model: AR Proper Eye Position Ready. Style: Picatinny. Misc: 1 . Finish: Matte Black.

Burris Ar-Pepr Qd 1 In With Picatinny Tops 410344 $99.99 AR-PEPR QD Scope Mount 1" with/Picatinny Rail - Manufacture ID: 410344The AR-P.E.P.R. QD Mount makes it easy to gear up for different applications or shooting disciplines. Two Quick Detach levers make it easy to change optics or switch to iron sights and still maintain return-to-zero reliability.- 1. Type: Gun Scopes

M44/MOSIN NAGANT91 SCOPE MOUNT $14.99 M-44 Monsin-Nagant 91 Scope Mount Picatinny base for the renowned M-44 Mosin Nagant Sniper rile.T6 Aluminum construction results in durability and lighter weight while the rugged cross slot bolts secure the bracket to provide extreme rigidity

Super 8 Smackover Ar $53.38 Super 8 Smackover Ar > ELD > 4403 Smackover Hwy > Smackover > AR > 71762>>El Dorado Goodwin Field Airport (ELD): Approximate driving time is 15 minutes and distance is 12 miles.

Trijicon Reflex Sight 6.5 MOA Rifle Scope - Amber Dot (Without Mount) - RX01 $420.75 This Trijicon Reflex Sight 6. 5 MOA Rifle Scope - Amber Dot (Without Mount) - RX01 is Trijicon s technologically advanced Reflex sight that offers shooters the perfect combination of speed and precision under virtually any lighting conditions. Warranty. Carries a limited lifetime warranty on the workmanship of the scope, illumination is warranted for 15 years from the date of manufacture. The Reflex also includes 1 Polarizing filter, 1 Dust cover, 1 Lenspen, 1 Trijicon Logo Sticker, 1 Reflex Manual, 1 Warranty Card. Warranty: Carries a 15-year warranty on the illumination (from the date of manufacture) and a limited lifetime warranty on the workmanship of the sight/scope.

Trijicon Reflex Sight 12.9 MOA Rifle Scope - Amber Triangle Reticle - Throw Lever Mount - RX06-23 $556.75 This Trijicon Reflex Sight 12. 9 MOA Rifle Scope - Amber Triangle Reticle - Throw Lever Mount - RX06-23 has technologically advanced Reflex sights that offer shooters the perfect combination of speed and precision under virtually any lighting conditions. The Reflex also includes 1 A. R. M. S 15 Throw Lever Mount, 1 Polarizing filter, 1 Dust cover, 1 Lenspen, 1 Trijicon Logo Sticker, 1 Reflex Manual, 1 Warranty Card. Warranty: Carries a 15-year warranty on the illumination (from the date of manufacture) and a limited lifetime warranty on the workmanship of the sight/scope.

Butler Creek 2015015 FlipUp Rifle Scope Cover No. 15 Eyepiece $24.15 This Butler Creek cover opens at the touch of your thumb and features a watertight friction mount and semi Oring that securely anchors the cover sealing out dust and moisture.

Butler Creek 3015015 FlipUp Rifle Scope Cover No. 15 Objective $24.15 This Butler Creek cover opens at the touch of your thumb and features a watertight friction mount and semi Oring that securely anchors the cover sealing out dust and moisture.

ATN ACMPAN14AFDT Scope Adapter Mount $323.7 Day time Scope Adapter Mount for ATN NVM 14 Night Vision Monocular includes: Flipup Adapter 7 inserts for variety of scopes or telescopes. (diameters of the adapters inserts 38.2; 38.7; 39.2; 39.7; 40.2; 40.7; 41.2 mm). Day time Scope Adapter Mount for ATN NVM14 Night Vision Monocular. Flipup adapter. Includes 7 inserts for a variety of scopes and telescopes (38.2; 38.7; 39.2; 39.7; 40.2; 40.7; 41.2 mm).

Bushnell 784405 Spotting Scope Window Mount $48.7 The Bushnell Spotting Scope Car Window Mount is a great accessory for hunters and sportsmen who cover a lot of ground in a day. When you are on the run moving from place to place in your car and you want your spotting scope handy at all times there is no substitute to a car window mount. This mount easily attaches and releases from any car window in your vehicle for use with any tripod adaptable device spotting scope camera or binoculars. Type: Window Mount. Purpose: Secures spotting scope. Finish: Black.

Trijicon ACOG 4x32 Rifle Scope - Red Chevron Reticle - Dual Illumination Rifle Scopes - Flattop Mount - TA31F $1218.05 The Trijicon ACOG 4x32 Rifle Scope - Dual Illumination Rifle Scopes - Flattop Mount - TA31F with chevron reticle is designed to be zeroed using the tip at 100 meters. The width of the chevron at the base is 5. 53 MOA which is 19 in. At 300 meters. This allows range estimation for silhouette targets. Features dual illumination (Fiber optics provides daylight illumination and tritium illuminates reticle at night). The ranging reticle is calibrated for 5. 56 (. 223 cal) flattop rifles out to 800 meters. Warranty: Carries a limited lifetime warranty on the workmanship of the scope, illumination is warranted for 15 years from the date of manufacture. The TA31F also includes 1 Flattop Mount, 1 4x32 Scopecoat, 1 Lenspen, 1 Trijicon Logo Sticker, 1 ACOG Manual, 1 Warranty Card

RossiBraztech P801 Scope Mount Base Blue $30.07 Made to fit all Rossi long guns this Rossi/Braztech Scope Mount Base Kit has the scope base and the screws to attach it. Be sure that the base is securely attached with the screws. If not done properly the Rossi/Braztech Scope Mount Base Kit could become loose and cause an unnecessary hazard. You may want to see a gunsmith for proper mounting of the Rossi/Braztech Scope Mount Base Kit. Color: Blue.

S8628 Aluminum Alloy Scope Mount Side Base for MP5 Gun $8.24 - Constructed from quality aluminum alloy - This high quality scope mount aiming fit for MP5 and other short guns - The scope mount is easy mounts and separation - The MP5 gun scope mount is satisfied with the most demanding customer - You can trust the high quality and performance of thethis scope mount kits ?

S8627 Fishbone Shaped Aluminum Alloy Scope Mount Side Base for AK47 $23.02 - Constructed from quality aluminum alloy - This high quality scope mount aiming fit for AK47 - The scope mount is easy mounts and separation - The scope mount is satisfied with the most demanding customer - You can trust the high quality and performance of the this scope mount

Super 8 Cabot Ar $61.47 Super 8 Cabot Ar > LIT > 15 Ryeland Dr > Cabot > AR > 72023>Location. This property is located in Cabot. Features. In addition to an outdoor pool, Super 8 Cabot Ar features business services. Guestrooms. All guestrooms provide microwaves and refrigerators. Notifications:Additional fees and deposits may be charged by the property at time of service, check in, or check out. >

Leupold 67160 Mark AR 39x40 Rifle Scope MilDot Matte Black $508.95 The Leupold Mark AR series of riflescopes is ideal for those who hunt with AR15/M16 style rifles delivering high performance at a price that s right on target. Long range shooting solutions for the tactical hunter have never been easier. Is the target at 500 yards? Simply turn the dial to the 5 and squeeze the trigger. It s that easy. Whether you shoot an AR15 platform or a bolt action the Leupold Mark AR 39x40mm has it covered. The 1/2MOA T2 elevation adjustment includes a preengraved bullet drop compensation (BDC) dial to match the ballistics of most 55 grain.223 Remington/5.56mm NATO loads. If you have a specific load you d like to have matched the Leupold Custom Shop can create additional dials for a nominal fee. The Multicoat 4 lens system delivers superior brightness clarity and optimal contrast even in low light. MilDot reticle. Lockable fastfocus eyepiece keeps your focus set. The power selector features aggressive knurling for easy adjustment even with gloves. The tactile power indicator identifies your magnification with a touch. Durable matte black finish. Custom Shop serviceable. customize your Mark AR. Tested to the same performance standards as Leupold Mark 4 optics. Rugged and absolutely waterproof in all conditions. Length (A): 12.4 . Tube Length (B): 5.6 (C): 2.3 (D): 2.2 . Eyepiece Length (E): 3.2 . Objective Length (F): 3.5 . Objective Diameter (G): 1.8 . Eyepiece Diameter (H): 1.6 . Tube Diameter (I): 1.0 . Actual Magnification: 8.6 (3.3). FOV 100 yds (ft): 14.0 (32.3). FOV 100 m (m): 4.7 (10.8). Eye Relief: 3.7 (4.7). Eye Relief (mm): 94 (119). Obj. Clear Aperture: 1.6 / 41 mm. Elevation Adj. Range (MOA): 56. Windage Adj. Range (MOA): 56.

Leupold Mark AR Rifle Scope - 1.5-4x20mm - Duplex Reticle - Black Matte - 67170 $279.99 The Leupold Mark AR Rifle Scope is ideal for those who hunt with AR15/M-16 style rifles, delivering high performance and long range shooting solutions for the tactical hunter. The Leupold Mark AR Rifle Scope features MOA T2 elevation adjustment that includes a pre-engraved bullet drop compensation (BDC) dial to match the ballistics of most 55 grain. 223 Remington/5. 56mm NATO loads, Multicoat 4 lens system which delivers superior brightness, clarity, and optimal contrast, even in low light, lockable, fast-focus eyepiece to keep your focus set, power selector that gives aggressive knurling for easy adjustment, even with gloves, and a tactile power indicator to identify your magnification with a touch.

Leupold Mark AR Rifle Scope - 4-12x40mm - Mil Dot Reticle - Black Matte - 67395 $499.99 The Leupold Mark AR Rifle Scope is ideal for those who hunt with AR15/M-16 style rifles, delivering high performance and long range shooting solutions for the tactical hunter. The Leupold Mark AR Rifle Scope features MOA T2 elevation adjustment that includes a pre-engraved bullet drop compensation (BDC) dial to match the ballistics of most 55 grain. 223 Remington/5. 56mm NATO loads, Multicoat 4 lens system which delivers superior brightness, clarity, and optimal contrast, even in low light, lockable, fast-focus eyepiece to keep your focus set, power selector that gives aggressive knurling for easy adjustment, even with gloves, and a tactile power indicator to identify your magnification with a touch.

Bill Hicks LEU 67160 Leupold Mark Ar Rifle Scope 39X 40Mm MilDot Reticle Matte $510.94 The Leupold Mark AR Rifle Scope is the perfect choice for those who use AR15 style rifles. The 39x 40mm model is ideal for mid to longrange shooting with its preengraved BDC dial designed for use with 55 grain .223 Remington ammunition. The lenses feature the Multicoat 4 Lens System which provides supreme clarity and brightness. Other features of the Leupold Mark AR include a tactile power indicator and a lockable eyepiece. To ensure optimum performance Mark AR scopes are rigorously tested at Leupold s Beaverton Oregon factory. Covered by the Leupold Full Lifetime Guarantee. Tube Diameter: 1 . Objective (front) Diameter: 45.7mm. Ocular (rear) Diameter: 40.6mm. Adjustment Click Value: 1/2 MOA. Eye Relief: 4.73.7 . Field of View at 100 Yards: 14 9x 32.3 3x. Lens Coating: Fully multicoated. Length: 12.4 .

Bill Hicks LEU 67170 Leupold Mark Ar Rifle Scope 1.54X 20Mm Duplex Matte $393.61 The Leupold Mark AR Rifle Scope is the perfect choice for those who use AR15 style rifles. The 1.54x 20mm model is ideal for close and midrange shooting with its wide fieldofview. The lenses feature the Multicoat 4 Lens System which provides supreme clarity and brightness. Other features of the Leupold Mark AR include a tactile power indicator and a lockable eyepiece. To ensure optimum performance Mark AR scopes are rigorously tested at Leupold s Beaverton Oregon factory. Covered by the Leupold Full Lifetime Guarantee. Tube Diameter: 1 . Objective (front) Diameter: 25mm. Ocular (rear) Diameter: 41mm. Adjustment Click Value: 1/2 MOA. Eye Relief: 4.33.8 . Field of View at 100 Yards: 28.5 4x 75 1.5x. Lens Coating: Fully multicoated. Length: 9.2 .

AR Riser Riflescope Mount $42.9 These BARSKA bases are designed to provide you with solid performance in the field. T6 Aluminum construction results in durability and lighter weight while the rugged cross slot bolts secure the bracket to provide extreme rigidity. These bases permit the mounting of a variety of firearms from SKS to AR-15, M16 to M4 Carbine and many more. Backed by the manufacturer's 1 Year Limited WarrantyFEATURES:Specially for AR-15 rifles.Weaver/Picatinny style.Made of T6 Aluminum.Rail length:5.2 inches.Durable and rugged.PRODUCT SPECIFICATIONS:Rail Type: Weaver/ PicatinnyRail Length: 5.9" Material: T6 AluminumApplicable Firearms: AR-15

FM AR15E Fm Optics Ar15 Flat Top 3Sided Scope Mount $33.68 Type: Ar15 Style Flat Top Mount. Finish: Black. Material: Aluminum Alloy. Three Sided Scope and Accessory Mount.

Excalibur 2006 Scope Mount 7/8 Inch Dovetail $39.65 Our SCOPE MOUNT is built from strong anodized aluminum to solidly and securely position your scope for accurate shooting. Using a weaver type base it installs in seconds using 4 pretapped mounting holes located on every trigger unit.

Excalibur Crossbow 9860 Scope Mount For Exocet XBow $40.81 The Excalibur Scope Mount is built from strong anodized aluminum to solidly and securely position your scope for accurate shooting. Using a weaver type base it installs in seconds using 4 pretapped mounting holes located on every trigger unit.

ProMag AR-15 Accessories, AR-15 Flat Top 1 Inch Scope Mount $81.95 The scope mount allows 1 inch diameter tube scope directly to the rifle. The mount ensures proper scope height without the need for extra high rings. The mount is quick detachable, held in place by a full length spring locking bar with two thumb screws. Constructed of hard anodized aircraft grade aluminum.

Aluminum Alloy Scope Mount Base for AK Series Gun S8609 $8.45 - Aluminum alloy material - Items include scope mount + hex wrench - Fit for AK series gun - Package Included: 1 x Scope Mount Base for AK Series Gun ?

Professional GL-4*32C Rifle Scope with Gun Mount $97.3 - 4x32 type scope- Superior optical glass- Fixed 4x zoom- With vertically and horizontally adjustable targeting cross- QR mount allows fast removal of the scope from RIS rail- Extra external sights gives chance to aim without magnification- Compatible with M40/M4A1 and so on- Package included:- 1 * Riflescope- 1 * Mount- 1 * Cleaning cloth

Dednutz 10005 Dednutz Scope MountSilver $114.06 DedNutz Game Reaper scope mounts are precision machined from the best material on the market top grade billet aluminum. Each Game Reaper scope mount is created from a solid block of aluminum. Aluminum absorbs shock better than steel. Deadnutz s Rigid design has no moveable parts between the firearm and the scope. No extrusions. Each Game Reaper scope mount is precision machined from start to finish. Game Reaper scope mounts are anodized to last the life of your firearm. No Lapping Required. Mount will not rust. Thompson Encore/Omega. 1 scope tube. Medium Mount. Color: Silver.

Dednutz 10006 Dednutz Scope MountBlack $114.06 DedNutz Game Reaper scope mounts are precision machined from the best material on the market top grade billet aluminum. Each Game Reaper scope mount is created from a solid block of aluminum. Aluminum absorbs shock better than steel. Deadnutz s Rigid design has no moveable parts between the firearm and the scope. No extrusions. Each Game Reaper scope mount is precision machined from start to finish. Game Reaper scope mounts are anodized to last the life of your firearm. No Lapping Required. Mount will not rust. Thompson Encore/Omega. 1 scope tube. Medium Mount. Color: Black.

Dednutz 52500 Dednutz Scope MountBlack $114.06 DedNutz Game Reaper scope mounts are precision machined from the best material on the market top grade billet aluminum. Each Game Reaper scope mount is created from a solid block of aluminum. Aluminum absorbs shock better than steel. Deadnutz s Rigid design has no moveable parts between the firearm and the scope. No extrusions. Each Game Reaper scope mount is precision machined from start to finish. Game Reaper scope mounts are anodized to last the life of your firearm. No Lapping Required. Mount will not rust. Browning BAR Long Action BLR. 1 scope tube. Medium Mount. Color: Black.

Dednutz 30002 Dednutz Scope MountBlack $140.38 DedNutz Game Reaper scope mounts are precision machined from the best material on the market top grade billet aluminum. Each Game Reaper scope mount is created from a solid block of aluminum. Aluminum absorbs shock better than steel. Deadnutz s Rigid design has no moveable parts between the firearm and the scope. No extrusions. Each Game Reaper scope mount is precision machined from start to finish. Game Reaper scope mounts are anodized to last the life of your firearm. No Lapping Required. Mount will not rust. Thompson Encore/Omega. Extended Eye Relief. 1 scope tube. Low Mount. Color: Black.

Dednutz 20200 Dednutz Scope MountBlack $114.06 DedNutz Game Reaper scope mounts are precision machined from the best material on the market top grade billet aluminum. Each Game Reaper scope mount is created from a solid block of aluminum. Aluminum absorbs shock better than steel. Deadnutz s Rigid design has no moveable parts between the firearm and the scope. No extrusions. Each Game Reaper scope mount is precision machined from start to finish. Game Reaper scope mounts are anodized to last the life of your firearm. No Lapping Required. Mount will not rust. Savage New Round Receiver Short Action. one inch scope tube. Right Hand Medium Mount. Color: Black.

Dednutz 12700 Dednutz Scope MountBlack $114.06 DedNutz Game Reaper scope mounts are precision machined from the best material on the market top grade billet aluminum. Each Game Reaper scope mount is created from a solid block of aluminum. Aluminum absorbs shock better than steel. Deadnutz s Rigid design has no moveable parts between the firearm and the scope. No extrusions. Each Game Reaper scope mount is precision machined from start to finish. Game Reaper scope mounts are anodized to last the life of your firearm. No Lapping Required. Mount will not rust. Remington700Long Action. 1 scope tube. High Mount. Color: Black.

Dednutz 18700 Dednutz Scope MountBlack $114.06 DedNutz Game Reaper scope mounts are precision machined from the best material on the market top grade billet aluminum. Each Game Reaper scope mount is created from a solid block of aluminum. Aluminum absorbs shock better than steel. Deadnutz s Rigid design has no moveable parts between the firearm and the scope. No extrusions. Each Game Reaper scope mount is precision machined from start to finish. Game Reaper scope mounts are anodized to last the life of your firearm. No Lapping Required. Mount will not rust. Remington 700Long Action. 1 scope tube. Right Hand medium Mount. Color: Black.

Dednutz 20700 Dednutz Scope MountBlack $114.06 DedNutz Game Reaper scope mounts are precision machined from the best material on the market top grade billet aluminum. Each Game Reaper scope mount is created from a solid block of aluminum. Aluminum absorbs shock better than steel. Deadnutz s Rigid design has no moveable parts between the firearm and the scope. No extrusions. Each Game Reaper scope mount is precision machined from start to finish. Game Reaper scope mounts are anodized to last the life of your firearm. No Lapping Required. Mount will not rust. Remington 700Short Action. 1 scope tube. Right Hand Medium Mount. Color: Black.

Bill Hicks LEU 67395 Leupold Mark Ar Rifle Scope 412X 40Mm Adjustable Objective MilDot Reticle Matte $693.51 The Leupold Mark AR Rifle Scope is the perfect choice for those who use AR15 style rifles. The lenses feature the Multicoat 4 Lens System which provides supreme clarity and brightness. Other features of the Leupold Mark AR include a tactile power indicator and a lockable eyepiece. To ensure optimum performance Mark AR scopes are rigorously tested at Leupold s Beaverton Oregon factory. Covered by the Leupold Full Lifetime Guarantee. Tube Diameter: 1 . Adjustment Click Value: 1/2 MOA. Finger Adjustable Turrets: Yes. Turrets Resetable to Zero: Yes. Turret Height: Medium. Fast Focus Eyepiece: Yes. Lens Coating: Multicoat 4. Power Variablity: Variable. Min power: 4x. Max power: 12x. Reticle Construction: Wire. Reticle: Mildot. Reticle Focal Plane Location: 2nd. Parallax Adjustment: Adjustable objective. Finish: Matte. Water/Fogproof: Yes. Shockproof: Yes. Objective Bell Diameter: 50.8mm. Ocular Bell Diameter: 40.64mm. Eye Relief: 3.7 . Max Internal Adjustment: 55 MOA elevation 55 MOA windage. Field of View at 100 Yards: 22.8 4x 11 12x. Dimensions in inches unless otherwise stated:. A: 12.4. B: 5.3. C: 2. D: 2.2. E: 3.1. F: 4. G: 50.8mm. H: 40.64mm.