Noh Ironogi Spotting Scopes

Remote Pressure

Windmill Site Selection Using Remote Sensing and Gis– a Case Study in , Andaman India

1. INTRODUCTION

The Andaman and Nicobar Islands are the summits of a submarine mountain range lying on the great tectonic suture zone that extends from the eastern Himalayas to the Arakan along the Myanmar border and finally to Sumatra and lesser Sundaes. This archipelago consists of a group of 572 islands, islets and rock outcrops, but there are a total of 352 important islands comprising the main chain of Andaman and Nicobar, Ritches Archipelago and the out laying volcanic islands of Narcondam and Barren. The islands are spread over an area of 8,249 sq.km, of which 6,408 sq. km of area is occupied by the Andaman group and 1,841 sq.km by the Nicobar groups of Islands. The Andaman group consists of 324 islands of which 24 are inhabited while the Nicobar group includes 28 islands of which 12 are inhabited. Undulating topography and intervening valleys characterize the physiography of this Archiepelago. There are several rain-fed streams, which dry up during summer. All the major islands support a luxuriant growth of evergreen, semi evergreen, moist deciduous and littoral forests from the water edge to the mountain top depending on the topography and nature of the soil. For administrative purposes, the Islands are divided into two districts, namely Andaman and Nicobar. There are a total of 204 revenue villages of which 197 are in the Andaman District. The Andaman and Nicobar is having a good economic turnover through Tourism Industry because of its rich natural scenic beauty and natural resources. At the same time these islands are facing problems such as population growth, commercial development etc and inturn facing acute power shortage.

The ever increasing energy needs of the islands will have to be taken into account in the long term Master Plan even at this state. Dependence should be entirely on the local resources – biomass and other resources of the islands as well as the vast renewable resources of the ocean and atmosphere. In this respect, it is possible that the technology that could be developed and perfected for the islands could be a path-breaker for the national program also. Bio-mass production could be undertaken on an accelerated scale under highly favorable conditions. Solar, tidal and wind resources could be of great importance. Resources from the ocean pose new challenges to our scientist and technologists. When agricultural production, industrial development and economic exploitation of oceanic resources go hand in hand, the energy problem is likely to be a constraint if timely steps are not taken in that direction (Qasim 1998).

Power is likely to become a serious constraint. Unless resources are discovered on the island, thermal power stations using coal or diesel oil are likely to be extremely expensive. Also the pollution arising out of the fuel could spoil the natural resources of the island. Possibilities for hydropower are limited due to non-perennial nature of rivers. In this context, it might be necessary to vigorously explore alternative sources of energy. Three approaches which are likely to prove fruitful are geothermal energy, wind energy and ocean thermal energy conversion (OTEC). Due to the volcanic origin of the main islands it is possible that suitable geothermal sites for fairly large scale power generation might be available. OTEC is already planned for Lakshadweep Islands. Possible OTEC sites should be explored for the Andamans also. Moreover, very little attempt has been made to explore the usage of wind energy. Appropriate sites of good wind energy could be targeted using satellite technology to promote wind mills (Qasim 1998).

In order to relieve the pressure on available land and water resources due to increase in population on presently inhabited islands possibility of shifting a part of this population to uninhabited islands after creation of necessary facilities needs to be examined. On some of these islands both solar and wind energy is available at exploitable levels. Use of Photovoltaic solar cells and wind mills for generation of power will go a long way in their development. The generating capacity of wind power systems ranges from 100 watts to 4 megawatt. The systems require the installation of a generator with rotor, tower, battery bank and control unit. A generator with an average capacity of 500 W with a 5-m diameter rotor and a life span of 10 years can cost Rs. 10,00,000 (TEDA 1999). These systems may benefit coastal resorts as these areas are generally exposed to wind. An average wind speed of greater than 4m per second is necessary if wind energy is to be economically feasible. In this case, wind generators are often cheaper than solar PV and diesel generators. Skilled technicians are required to install and maintain the system. Maintenance requires regular checking and access to new parts (Huttche et.al. 2002).

Because of the important relationship between the available power and the wind speed, turbine should be suitably located as to allow free movement of the wind. Wind energy is particularly appealing way to generate electricity because it is essentially pollution-free. More than half of all the electricity that is used in India is generated from burning coal, and in the process, large amounts of toxic metals, air pollutants and greenhouse gases are emitted into the atmosphere. Development of 10% of the wind potential in the 10 windiest Indian states would provide more than enough energy to displace emissions from the nation's coal-fired power plants and eliminate the nation's major source of acid rain; reduce emissions of carbon dioxide (the most important greenhouse gas); and help to contain the spread of asthma and other respiratory diseases aggravated or caused by air pollution in this country. If wind energy were to provide 20% of the nation's electricity, a very realistic and achievable goal with the current technology, it could displace more than a third of the emissions from coal-fired power plants, or all of the radioactive waste and water pollution from nuclear power plants. Table 1 shows the state wise installed wind power in India.

Any development plan of islands should be based on long term need, taking note of natural resources both living and non living, ecological status, natural beauty and the present state of development of the region. This requires reliable and upto date database about the natural resources and their distribution over space. With the conventional methods the data obtained are often time consuming and less accessible. The remote sensing technology with its uniform and unbiased data collection system has the capability of providing the much needed information on large areas in single synoptic view, in short time, and at periodic intervals. For inaccessible areas this is the only source of data collection. Hence in order to identify sites for wind mills as a pilot project for North Passage Island, Remote Sensing and GIS techniques were used.

For proposing suitable sites for windmills using Remote Sensing and GIS the following criteria were adopted:

1. Flat plain region and the slope less than 5°

2. Minimum canopy cover with the trees height should be less than 40m

3. Surrounding regions should have less than 60m elevation

4. Windward side is most suitable than leaward side

5. Open shoreline as a mountain gap which produces wind funneling effect

6. ‘U’ shaped valley regions with good wind speed

State As on 31.03.2002 As on 31.03.2003 As on 31.01.2004

Demons-tration Projects (MW) Private Sector Projects (MW) Total Capacity (MW) Demons-tration Projects (MW) Private Sector Projects (MW) Total Capacity (MW) (MW)

Andhra Pradesh 5.4 87.2 92.6 5.4 87.2 92.6 92.8

Gujarat 17.3 149.6 166.9 17.3 155.8 173.1 201.2

Karnataka 2.6 66 68.6 2.6 121.7 124.3 177.5

Kerala 2 - 2 2 0 2 2

Madhya Pradesh 0.6 22 22.6 0.6 22 22.6 22.6

Maharashtra 6.4 392.8 399.2 8.4 392.8 401.2 401.3

Rajasthan 6.4 9.7 16.1 6.4 54.3 60.7 109

Tamil Nadu 19.4 838.1 857.5 19.4 970.9 990.3 1119.7

West Bengal 1.1 - 1.1 1.1 0 1.1 1.1

Others 1.6 - 1.6 1.6 0 1.6 -

Total (All India) 62.8 1565.4 1628.2 64.8 1804.7 1869.5 2117.2

Source: TADA (1999)

Table 1: State-wise wind power installed capacity in India

2. STUDY AREA

The Andaman and Nicobar Islands are situated in the Bay of Bengal within 6° and 14° N latitude, 92° and 94° E longitude. For administrative purposes, the Islands are divided into two districts, namely Andaman and Nicobar. The former consists of two sub divisions, namely South Andaman and Mayabunder consisting of four tahsils. The Nicobar district is divided into Car Nicobar and Nancowry tahsil. The four tahsils of Andaman district are Diglipur, Mayabunder, Rangat and South Andaman. The South Andaman tahsil is further bifurcated into two tahsils namely, Port Blair and Ferrargunj. At present 36 islands in Andaman and Nicobar Islands are inhabited. The population as per 1991 census is 2,80,661 and as per 2001 census it is over 3,50,000 in Andaman and Nicobar Islands. Of the total population, the majority (90%) is settlers from outside the islands.

3. METHODOLOGY

GIS mapping method was used to identify and map the sites with potential wind power in North Passage Island. Using Arc View GIS software, thematic maps such as landuse, 3-d elevation model, and slope were digitized, rectified, analysed and integrated for identifying suitable sites for erecting windmills.

4. RESULTS AND DISSCUSSION

The fluid (air) that drives the rotor is much less dense than water, and so the diameter of the rotor must be much larger than the rotor of a hydro turbine. A hydro turbine capable of generating one megawatt (MW) of power would be several meters in diameter--a 1-MW wind turbine's rotor would be roughly 54 meters across. Second, wind energy is available over a much larger geographical range than hydropower according to AWEA 2003.

Good wind speeds are important. The energy that the wind contains is a function of the cube of its speed (Jeyakumar et.al., 2002). This means that a site with 12-mph average winds has more than 70% more energy than a site with 10 - mph average winds.

The wind power produced varies with the cube of wind speed. The mass of air (m) with speed (v) and density (d) flowing per unit time through area (A) swept by the blades of a conventional horizontal axis wind turbine is dAV. Thus the kinetic energy of this mass of air is given by 1/2mV2 = 1/2dAV3. So it is very important to locate windfarms in areas with high average wind speeds. Wind speed increases with height above the ground; it also increases over open areas (sea, large lake, etc). It has been seen that for wind power development, sites with average wind speeds of 6.5 to 8 m/sec are the ideal sites (Suneel 1995). The wind power density observed at Andaman group of islands are within the range from 55.30 to 106.60 W/M2.

Using remote sensing and GIS for selection of site for windmills have many advantages such as it reduces time, cost and manpower for locating wind monitoring stations, it provides predefined knowledge to locate wind monitoring stations, inaccessible areas could be identified, integrated and a perspective study could further enhance the scientific research potential for windmill site location. Table 2 shows the island-wise data of wind monitoring stations for potential sites in Andaman & Nicobar Islands. One of the best possible sites for locating wind machines is the top of a smooth, well rounded hill with gentle slope lying on a flat plain. A site located on an island in a lake or a sea is usually an excellent site; open plain, an open shoreline as a mountain gap which produces wind funneling is good. The proposed site of windmills falls in the latitude and longitude extension of 12° 17’ 00.50” N – 12° 17’ 54.94” N and 92° 55’ 53.74” E – 92° 56’ 06.62” E (Figure 1). The area of the proposed site is 50 hectares. About 5-MW of electricity could be generated in this area.

S.No Latitude Longitude Station Wind power density (W/M2) at 20m Altitude

1 10° 34” 92° 26” South Bay 106.60

2 08° 15” 93° 08” Minyuk 62.60

3 08° 13” 93° 10” Chukmachi 66.20

4 13° 14” 92° 57” Ramkrishnagram 55.30

5 12° 53” 92° 54” Pokkadero 63.10

6 11° 39” 92° 45” Barkath line 63.00

7 11° 40” 92° 44” Phoenix bay 68.50

Source: CWET 2000

Table 2. Island wise wind monitoring station in Andaman & Nicobar Islands

Wind monitoring stations report on places such as Ramakrishnagram, Pokkadero, Phoenix bay, Barkath line, South Bay, Minyuk and Chukmachi reveals that the general wind direction is towards South - SW and its energy varies from 55.30 W/M2 to 106.20

W/m2 (Figure 2). Low wind energy is observed at the mainland whereas at the shore the wind energy is high. Moreover the windward side of the elevation has maximum wind energy whereas at its leaward side wind energy is reduced because of its thick canopy cover and scattering of the winds due to elevated regions.

Generally the small islands situated at the leeward side of the larger islands which has an elevation greater than 60m could not be proposed for windmills because of its elevation and canopy effects. Whereas in the case of North Passage Island it is surrounded by islands such as Baratang in East, Middle Andaman in North and Strait in South. Though it is surrounded by largest elevated islands the geographical location is well suited for windmills . Eastern side of the north passage has got a passage, Homfrey’s strait. It acts as a funnel for wind flow. The surrounding elevation of this island is less than 60m and it is about 7 km away from the shore of Baratang island. Hence, this island has got an excellent geographical location for utilizing it for windmill erection.

For North Passage Island the slope analysis is carried out using Arc View GIS software reveals that the majority of the island falls within the slope of 10°. The area proposed for windmill erection is within a 5° slope. This slope is most suitable for erecting wind mills continuously in the terrain. Topography of the study area reveals that there is a U shaped valley found between northern and eastern portion of the island. The peak height of the northern part of the island is 64 meters and the eastern part of the island is 84 meters. This valley region is surrounded by sea and favorable amount of air flow is observed due to this U shaped topography. The continuous wind action makes this an excellent locality for erecting wind mill. Because of the U shaped valley and proximity to the sea the wind action were found to have good speed.

The electricity generated through this wind mill could be transferred to the nearest inhabited islands also. The following islands were the nearest inhabited islands from North Passage Island (Figure 3). The distance from North Passage to Long Island is 7.8 km, Strait is 8.3 km, Baratang is 15.11 km and North Andaman is 11.9 km. Implementation of this study would be extremely useful to the inhabitants of this island as well as to the nearby neighboring islands.

5. CONCLUSION

This study investigates the potential of satellite technology to identify the site for erecting windmills. The usage of ArcGIS software for the integration of thematic information such as geomorphology, wind, landuse etc through satellite imagery, field survey data and other attribute information enhances the study as well as increases its accuracy. Similar study could be attempted in other parts of the Andaman islands where the air flow is free and probably at the windward side of the island i.e. the western portion of Andaman.

ACKNOWLEDGEMENT

The author is grateful to Ministry of Environment and Forest for providing funding support and to the Director, CWET, Chennai for providing relevant information to validate this study.

About the Author

The Author is a Project Manager in Stesalit Inc.

http://www.stesalit-inc.com/userexperience.html

Z.532.920.931.22 Remote Pressure Balance $146.25 Remote Pressure Balance Valve

R209028 CSA Remote Pressure Switch for C8 Flashlight $3.16 - Remote Pressure Switch Suitable Flashlight - Original, High quality, very fit for flashlight - The pressure pad cover is made from durable colloidal silica, your flashlight is activated just by any of the four sensors- The coiled cable is made from resilient PU material- The tail adaptor connected to the flashlight is made from aluminum with hard-anodized finish for anti-scratch and anti-abrasive durability

E269763 Remote Pressure Switch for 500 Flashlight $3.74 - Remote Pressure Switch Suitable Flashlight - Original, High quality, very fit for flashlight - The pressure pad cover is made from durable colloidal silica, your flashlight is activated just by any of the four sensors- The coiled cable is made from resilient PU material- The tail adaptor connected to the flashlight is made from aluminum with hard-anodized finish for anti-scratch and anti-abrasive durability

69763 VW-1 Remote Pressure Switch for 51IB Flashlight $3.8 - Remote Pressure Switch Suitable Flashlight - Original, High quality, very fit for flashlight - The pressure pad cover is made from durable colloidal silica, your flashlight is activated just by any of the four sensors- The coiled cable is made from resilient PU material- The tail adaptor connected to the flashlight is made from aluminum with hard-anodized finish for anti-scratch and anti-abrasive durability

Waekon Industries WAE48165 Universal Digital Pressure Gauge with Remote Read $455.05 Features and Benefits: Rugged Drop proof all Aluminum case and digital readout. More robust than analog gauges Remote Readings fluids stay at the test point. The 10 cord enables the readout to be inside the vehicle Digital accuracy fast repeatable results during injector pressure drop tests. Min/Max feature captures roadtest pressure dropouts Versatile and accurate fits most popular pressure test kit adaptersThe Universal Digital Vacuum/Pressure Gauge with a remote readout is designed to test pressure in various automotive systems such as fuel transmission or oil pressure. It is perfect for road testing since the remote readout is easily located inside the vehicle.

KLARUS ED10 Tactical Remote Pressure Pad for XT10 $20.3 - High quality resilient P material - 100,000 clicks cycle - Waterproof to IPX-8 standard - Length of curly wire:23cm - Diameter of tail: 25mm,length to tail:40mm - The constant-on switch is on the remote pressure pad,so no need to reach for the tail-cap of the flashlight to access cinstant-on - Provides multiple outputs and tactical momentary-on function . The constant-on switch also providesaccess to High-Mid-Low modes and strobe - Super low standby mode consumes almost zero battery life - Easy operation

Morovision MVLFA050637 7 in. Right Angle Remote Cable Pressure Pad Switch $84.24 7 Right Angle Remote Cable Pressure Pad Switch. Fits ITALA ITALHP OTALA OTALHP IWAL DBALA2 DBALA3 and DBALI2 without threaded receptacle port.

Morovision MVLFA052197 7 in. Straight Wire Remote Cable Pressure Pad Switch $84.24 7 Straight Wire Remote Cable Pressure Pad Switch. Fits ITALA ITALHP OTALA OTALHP IWAL DBALA2 DBALA3 and DBALI2 without threaded receptacle port.

Morovision MVB30129 Straight Wire Remote Cable Pressure Pad Switch. $92.66 Morovision Straight Wire Remote Cable Pressure Pad Switch for OP6 features interchangeable tail caps allow Operator Op6 tactical lights and LAS/TAC lasers to be configured as either handheld or weaponmounted devices. Use the Straight Wire Remote Cable Pressure Pad for hands free targeting when operating a weapon. Morovision is known for the highest quality in all of their Morovision Night Vision products. Be sure to check out the rest of Morovision products and other high performance night vision product selection. Morovision Straight Wire Remote Cable Pressure Pad Switch for OP6 is applicable to the following: OP6 Tactical Flashlight. Throw Lever OP6 Tactical Flashlight. Ring Mount Package Contents: Morovision Straight Wire Remote Cable Pressure Pad Switch for OP6.

Morovision MVBNONAIRP Remote Pressure Switch $46.02 Connects to the Extra Long Range Infra Red Illuminator 805nm. Allows user to operate device from a location located on the barrell mount or closely connected night vision device Momentary switch allows to save power. Replaces battery cap. Mounts with Velcro..

Tippmann Connex Remote Line $39 All-in-one quick disconnect and on/off Connects and disconnects under pressure 3000 PSI remote coil kit

Waekon WAE48165 Universal Digital Pressure Gauge with Remote Readout $455.05 The Universal Digital Vacuum/Pressure Gauge with remote readout is designed to test various automotive systems such as feul transmission or oil pressure. It is perfect for road testing since the remote readout is easily located inside the vehicle.Versatile and accurate 30 inHg to 350 PSI digital gauge NIST traceable +/1 accuracy for use when testing fuel oil or transmission line pressure on both gasoline and diesel engines. Fits most popular pressure test kit adapters. Unique Features:. Heavy duty all aluminum case and digital readout. More robust than analog gauges no mechanical parts to go out of calibration. Remote Readings Fluids stay at the test point. The 10 cord enables the readout to be inside the vehicle while fluids remain outside. No taping gauges to the window or worrying about leaks. Min/Max feature captures roadtest pressure dropouts. Digital accuracy provides fast repeatable results during injector pressure drop tests. Large backlit readout offers superior readability in low lighting or sunlight. Displays PSI KPA inHg and BAR no need to convert measurements. Made in the USA. Toll Free Tech SupportKit Contents:. Remote digital pressure gauge. Ford fuel schrader adapter. GM/Chrysler fuel schrader adapter. 1/8 male NPT to Quick connect male adapter. Female quick connect fitting fits most popular fuel and transmission pressure test kits. 1/8 NPT transducer termination for easy adaptability. Rugged plastic storage case.

Foxfury 50319 Rifle Kit Remote $47.58 Rifle remote kit for use with HammerHead TacStrobe flashlight. Light turns on and off (and changes mode) via use of the remote pressure switch. Designed for use on guns.

Pressure $11.49 Pressure

Pressure Relief Valve $81.25 High Quality Content by WIKIPEDIA articles A pressure relief valve is a safety device that relieves in case of overpressure in a vessel or piping. The generic terms are pressure relief valve (PRV) or pressure safety valve (PSV). Main types of pressure relief valves include: Relief valve (RV) automatic system that relief by static pressure on a liquid. It specifically open proportionally with pressure increasing. Safety valve (SV) automatic system that relieve static pressure on a gas. It specifically opens almost straight to full lift after a pop sound. Safety relief valve (SRV) automatic system that relief by static pressure on both gas and liquid. Pilot operated safety relief valve (POSRV) automatic system that relief by remote command from a pilot on which the static pressure (from equipment to protect) is connected. Low pressure safety valve (LPSV) automatic system that relief by static pressure on a gas. The pressure is small and near the atmospheric pressure. Vacuum pressure safety valve (VPSV) automatic system that relief by static pressure on a gas. The pressure is small, negative and near the atmospheric pressure. Author: Surhone, Lambert M./ Timpledon, Miriam T./ Marseken, Susan F. Binding Type: Paperback Number of Pages: 114 Publication Date: 2010/08/02 Language: English Dimensions: 6.00 x 9.02 x 0.27 inches

Waekon Universal Digital Pressure Gauge w/Remote Read. Each $332.51 Manufacturer: Waekon Industries. Each. Features Benefits: Rugged, Drop proof all Aluminum case and digital readout. More robust than analog gauges Remote Readings - fluids stay at the test point. The 10' cord enables the readout to be inside the vehicl

Free Shipping,UltraFire WF-501B Flashlight Pressure Pad Switch $22.79 Remote pressure activated switch. Change the toggle switch to pressure switch, turn your normal.

Pressure's On $6 Pressure's On - Birdman

Pressure Pressure $6 Pressure Pressure - Mink

The Pressure $6 The Pressure - Teena Marie

SA340 ioDIGITAL Remote in $116 From finishes that are guaranteed to last a lifetime to faucets that perfectly balance your water pressure Moen sets the standard for exceptional beauty and reliable innovative design

SA340BL ioDIGITAL Remote in $116 From finishes that are guaranteed to last a lifetime to faucets that perfectly balance your water pressure Moen sets the standard for exceptional beauty and reliable innovative design

SA349BL ioDIGITAL remote- $113 From finishes that are guaranteed to last a lifetime to faucets that perfectly balance your water pressure Moen sets the standard for exceptional beauty and reliable innovative design

Moen ioDigital Optional Chrome Remote $309.73 From finishes that are guaranteed to last a lifetime, to faucets that perfectly balance your water pressure, Moen sets the standard for exceptional beauty and reliable, innovative design.Faucet type: Optional remoteFaucet finish: ChromeChrome finish to create a bright, highly reflective, cool grey metallic lookRemote range 30 feetHot top off functionWall bracketLow battery indicator

Genius Remote Foot Massager $269.99 You will fall in love with this foot massager!? The pressure pad is designed based on the reflexology points of the human foot,each node conforming to reflexes connected to various organs and bodily s

Extreme Rage Coiled Remote with Quick Disconnect $35.95 Extreme Rage Coiled Remote The Extreme Rage Coiled Remote comes standard with a quick disconnect attachment and professional quality 3000psi rated working pressure. The flexible coiled design allows for outstanding range of motion. Features Professional Quality 3000PSI Rated Working Pressure Flexible Coiled Design Allows Outstanding Range of Motion ASTM Standard Male Adapter Quick Disconnect Attachment

Remote, Uvn800/Boxw Remote , Uv $41.99 REMOTE, UVN800/BOXW REMOTE , UV

Devilbiss DEV9000A-650 Remote Control Module Software $119.95 The DeVilbiss Remote Control Module Software is designed to allow easy access and control of parameters for the 8054 and 9001 CPAP. Using the software developed for the PalmOS computing platform and the custom interface cable, a common PDA (personal digital assistant) can be turned into a powerful, full-featured remote control. When the PDA is not being used as a remote control, it can be used for any of the other common uses for a PDA. The remote is intended for use by a home health care provider to set up DeVilbiss CPAP therapy units for patients. The large screen of the Remote Control Module allows information from the CPAP on-board LCD to be displayed simultaneously, reducing the need to scroll through options on the CPAP LCD to display the data you would like to see. Real time pressure reading and CPAP operation mode can also be observed by the remote control.

Microwave Propagation and Remote Sensing $129.95 Because prevailing atmospheric/troposcopic conditions greatly influence radio wave propagation above 10 GHz, the unguided propagation of microwaves in the neutral atmosphere can directly impact many vital applications in science and engineering. These include transmission of intelligence, and radar and radiometric applications used to probe the atmosphere, among others. Where most books address either one or the other, Microwave Propagation and Remote Sensing: Atmospheric Influences with Models and Applications melds coverage of these two subjects to help readers develop solutions to the problems they present. This reference offers a brief, elementary account of microwave propagation through the atmosphere and discusses radiometric applications in the microwave band used to characterize and model atmospheric constituents, which is also known as remote sensing.Summarizing the latest research results in the field, as well as radiometric models and measurement methods, this book covers topics including: Free space propagation Reflection, interference, polarization, and other key aspects of electromagnetic wave propagation Radio refraction and its effects on propagation delay Methodology of estimating water vapor attenuation using radiosonde data Knowledge of rain structures and use of climatological patterns to estimate/measure attenuation of rain, snow, fog, and other prevalent atmospheric particles and human-made substances Dual/multifrequency methodology to deal with the influence of clouds on radiometric attenuation Deployment of microwaves to ascertain various tropospheric conditions Composition and characteristics of the troposphere, to help readers fully understand microwave propagation Derived parameters of water, free space propagation, and conditions and variable constituents such as water vapor and vapor pressure, density, and ray bending