Noh Ironogi Spotting Scopes

Picatinny Weaver Rail

The ICS electric airsoft rifles are an exact replica of the real gun, a one to one ratio to the real thing. The AK74 RAS is a full metal construction rifle that will give you years of reliable and extremely high performance, whether you are shooting at targets or skirmishing on the battlefield.

It fires in both the fully automatic and semi automatic modes at a blazing 850 rounds per minute. The adjustable hop up will allow any shooter to easily dial in the ammunition from either close up or from far away, making this electric airsoft rifle very versatile.

It incorporates a front and rear sight, and also has an accessory rail and Weaver/Picatinny bases for the addition of optics, scopes, or any other accessory that you would like to install on it.

The 1 piece Tokyo Marui compatible version 3 gearbox makes this an exceptionally fast and accurate shooting airsoft rifle. The 550 round high capacity magazine will last you through the majority of battles. But, ICS includes two of the high capacity magazines so that you will never have to worry about running out of ammunition when battling it out with the enemy.

Included is a 9.6 volt NiMH 2000 mah large battery and a 9 volt 500 mAH charger for both the NiCad and the NiMH battery types. The 9.6 volt battery will give this gun plenty of firing power and long lasting performance.

The rifle weighs in at a robust 7.4 pounds and has an overall length of 38 inches. The rear sight is adjustable for windage, and upon firing, the AK74 produces a loudness factor of just under a 3, which is below the average noise level for most airsoft guns.

It is recommended that you only shoot.2g and.25g ammunition from the rifle. This will give you the type of performance that this gun will produce time and time again. As with all airsoft guns, the orange tip should never be removed. This is an exact replica of the real thing, and mistakes can be made when looking at the electric airsoft rifle.

You can take a closer look at the KWA KM4 SR5 and other great electric airsoft rifles [http://www.airsoftaddiction.com] at [http://www.airsoftaddiction.com], a website devoted to all airsoft enthusiast and the airsoft hobby. Airsoft Addiction has been supplying the airsoft community with exceptional airsoft rifles for the last 3 years and is known for their dedicated customer service and great value.

Mako HBA Harris Bipod Adapter for Picatinny/Weaver Rail Black $37.91 Fits Picatinny or Weaver rail. A Bipod previously attached to this accessory will allow the operator quick installation of bipod as a railmounted accessory.

LaserMax LMSMANTA Remote Switch Mount 3 Cord Clips Picatinny or Weaver Rail Black $55.98 Type: Remote Switch Mount. Color: Black. Accessories: 3 Cord Clips. Fit: Picatinny or Weaver Rail. Satisfaction ensured.

Weaver Picatinny R.I.S. Airsoft Paintball Flip Up Front & Rear Rail Fixed Peep Sight Set Tippmann BT $9.99 Brand new, never used! List Price: $29.95! R.I.S. compatible. Designed to fit any Weaver/Picatinny Rail System. Features: lightweight, yet durable polymer composite construction, and adjustable up/down positions. Mil Sim style. An excellent choice for any scenario player looking for more accuracy out of their shots. The Front and Rear Sights easily install and detach from your marker in seconds and are adjustable. Type: Fixed Sights Material: Composite Color: As Shown

Vortex Picatinny Rail Tripod Mount - PTM $24.99 Vortex Picatinny Rail Tripod Mount.

DOVETAIL- WEAVER CONVERTER $20.99 Converts dovetail rail to picatinny/weaver rail. 1/2" high rise mount with see through peep sight Rail Type: Weaver Rail Length: 4.75 inch Material: T6 Aluminum Color/Finish: Black/Matte Warranty: Manufacturer 1 Year Limited

Vortex Standard 30mm Rifle Scope High Rings - Picatinny / Weaver Mount - Set Of 2 - 30MRNG-H $19.99 The Vortex Standard 30mm Medium Rifle Scope rings mount on Picatinny or Weaver type rails positioning the center of the riflescope tube at a height of 1. 22 inches (31mm) from the base rail surface. Made from aircraft-grade 6061-T6 aluminum for optimum strength.

Global Military Gear GMGBPW Gear Bipod Picatinny Black $40.63 Low Profile Folding Bipod. Extends from 9 11 . Attaches to any Weaver / Picatinny rail. Nonslip rubber feet. HighTech Durable Aluminum Construction. Springoperated simple operation.

Trijicon RM33 Low Picatinny Rail Mount $116.37 Low Picatinny Rail Mount . Manufacture ID: RM33. Low Picatinny Rail Mount for RMR

ProMag Picatinny Rail Sling Swivel $24.75 The Picatinny rail sling swivel allows the use of standard and tactical slings on weapons with Picatinny rail systems. The swivel may be attached to any point on the weapon where a rail is present. Constructed of black hard anodized aircraft grade aluminum with a standard military sling swivel. All mounting hardware included.

Fenix Picatinny Rail Tactical Flashlight Ring ALG-01 $12.99 Fenix Picatinny Rail Tactical Flashlight Ring ALG-01 Type: Flashlights

GGamp;Gamp;#44; Inc. GGG1125 Tactical XDS Swivel Bipod Picatinny Black $299.23 Fit Rifles with Picatinny BOTTOM rail on the forearm. GGandG s gun bipod will also attach to any rifle with a 6 o clock under barrel MILSTD1913 or Weaver type rail. Finish: Black.

Green Laser Sight 5mW for Firearms w/ Picatinny or Weaver Style Rails $99.94 BARSKA’s new GLX third generation standard 5mw green laser features external riflescope style windage and elevation (W/E) adjustments for quick, high precision targeting. The 3rd Gen GLX laser makes zeroing in your laser a quick and easy process, simply unscrew the protective W/E caps to access the finger adjustable turrets to move the laser dot up/down and left/right. Emits a highly visible intense Green laser beam. The green laser produces light of 532 nm in wavelength. 532 nm green laser light is known to be the most visible color light because of its sensitivity to the human eye. Powered by a high capacity CR-123A lithium battery (1pc battery included) the 3rd Gen GLX standard tactical laser can emit a high itensity green laser beam constantly for accurate targeting. The new tactical design integrates a tactical edged bezel into the strong T6 aluminum body for added protection. The new diamond cut exterior grip improves the mounting capability of the picatinny 1� mounting ring included with the laser sigh Specifications: Model # AU11404. Adjustment Knob External Windage and Elevation. Tube Diameter 1 inch. Finish Black Matte. Included Accessories Includes 1� picatinny Rail Ring with removable cross-bar, Continuous push button on/off cap, Momentary on/off long cable switch, and one high capacity CR-123A lithium battery Features: BARSKA’s new GLX third generation standard 5mw green laser features external riflescope style windage and elevation (W/E) adjustments for quick, high precision targeting. The 3rd Gen GLX laser makes zeroing in your laser a quick and easy process, simply unscrew the protective W/E caps to access the finger adjustable turrets to move the laser dot up/down and left/right. Emits a highly visible intense Green laser beam. The green laser produces light of 532 nm in wavelength. 532 nm green laser light is known to be the most visible color light...

RIS Rail Mil Sim Shroud for Tippmann A5 Flatline Barrel paintball picatinny NEW! $9.99 Mil Sim style RIS replacement shroud for your Tippmann A5 with Flatline barrel. This is the shroud only! Vented tube with four Picatinny rails for sights, foregrips, etc. (accepts Weaver mounts). Black anodized aluminum. 8 inch overall.

ProMag PM063C HK USP .45 Compact M3 M6 Flashlight Weaver Rail Adapter $36.17 This hard anodized aircraft grade aluminum constructed adapter clamps the accessory rail on HK full size pistols. The rail allows the use of flashlights and lasers designed to attach to Weaver or Picatinny rails. Fit Heckler and Koch USP Compact.

ProMag PM063 HK USP Pistol M3 M6 Flashlight and Weaver Rail Adapter $36.17 This hard anodized aircraft grade aluminum constructed adapter clamps the accessory rail on HK full size pistols. The rail allows the use of flashlights and lasers designed to attach to Weaver or Picatinny rails. Fit Heckler and Koch USP Full Size.

ProMag PM131 Picatinny Rail Sling Swivel $34.98 The Picatinny rail sling swivel allows the use of standard and tactical slings on weapons with Picatinny rail systems. The swivel may be attached to any point on the weapon where a rail is present. Constructed of black hard anodized aircraft grade aluminum with a standard military sling swivel. All mounting hardware included.

ProMag PM141A Tac Picatinny Scope Rail $69.55 Tactical Picatinny Scope Rail . Manufacture ID: PM141A. The PM141A Tactical Picatinny Ruger Ranch Scope Rail provides additional flexibility when mounting longer scopes electronic sights or night vision. The scope rail attaches directly to the integral bases on the Ranch rifle. The scope rail requires no modifications to the rifle; quickly attaches to Mini14 Ranch Mini30 6.8 Ranch rifles. The rail (10.5 long rail) positions the scope over the receiver for improved balance and better eye alignment. Machined from T6 aluminum then type III anodized. The Lightweight aluminum rail keeps weight to a minimum. The scope rail accepts both Weaverstyle and Picatinny rings and optics. Red dot holographic and other sights may be used as well. The scope rail fits only Ruger ranch rifles with integral scope bases. All mounting hardware included.

Drift Innovation Picatinny Mount - Black $42.95 The Drift Picatinny Mount allows you to attach your camera to a standard Picatinny rail (MIL-STD-1913 rail, STANAG 2324 rail or "tactical" rail) on your gun or rifle.

Nc Star Mcusp Hk Usp Compact Pistol Weaver Mount Conversion Adaptor $25.65 The NCStar HK USP Pistol Mount to Weaver/Picatinny Rail Adaptor will convert the standard HK USP pistol mount to a Universal Weaver Style/Picatinny mount so that you can use all of the popular Weaver Style accessories available today. Standard Weaver/Picatinny style rails allow mounting of a wide array of accessories. Matte Black Finish. Available for the standard size HK USP and the HK USP Compact model.

ProMag PM015A 11 Rib 1913 Picatinny Rail Panel 4 Pack $32.7 ProMag Picatinny Rail Covers. Protects Rail when not in use and provides a positive grip surface. Constructed of glass filled black polymer. Fit: Picatinny. Units per Box: 4 Pack.

NcStar AR-15 Handguard Rail Bipod $18.99 AR/M16 Bipod fits most Weaver-Style/Picatinny Hand Guard Rails Weight:16.12 oz. Height:6.8" (Legs Collapsed), 9.53" (Legs Extended)

FNH USA Inc P90 / PS90 Accessories, P90 M193 Rail For USG Model $140 Military specification 1913 Picatinny Rail to replace the factory standard sight to allow the mounting of optical units. Weaver style with cross units.

Designer's RSA Picatinny Rail Sling Adapter(Black) $6.11 - The RSA ectype provides a forward sling attachment point for the Magpul MS2 or MS3 and other clip-in systems.- Made from precision cast black manganese phosphatized steel, the RSA attaches to any MIL-STD-1913 Picatinny/STANAG 4694 rail.

MP5/G3 Low Profile Weaver Rail Mount Base (Black) $9.2 Top 21mm Picatinny RailHigh-durability aluminum alloy in black matt and beautiful complementShock proof can be used on real fire caliberDesigned especially for HK MP5 / G3Convenient for installation and releaseWeight: 136gDimension: 130*40*18 mm

EMA Tactical EVG Grip Black Any Picatinny Rail $33.37 Provides a natural fighting stance. Incorporates a storage compartment. Rubberized back for comfortable grip surface. No tools required captive thumbnut. Color: Black. Fits Picatinny rail. Made of Polymer. Type: Grip. Fit: Any Picatinny Rail. EMA Tactical.

Empire Battle Tested 45 Degree Offset Picatinny Sight Rail $23.95 The BT 45 degree Offset Picatinny Rail allows for accessories mounting at a 45 degree angle so they will not interfere with your loader or sight line.

SGM Tactical SGMTSPR Picatinny Rail Saiga Black $55.38 Type: Rail. Color: Black. Fit: Saiga.

Magpul Industries MAG012ODG XT Rail Texture Panel Accessory Rail Covers Picatinny Green $25.82 Rail Texture Panel Accessory Rail Covers Picatinny prevents damage to gear such as rappelling ropes that may be abraded or cut by uncovered rail sections. Sections can mount next to each other to form a visually continuous cover. Provides rubbery grip surface for improved weapon control. Protects the operator from sharp rail edges. Protects unmounted rail areas from damage. Easily cut for custom fitting. Each covers 15 slots of rail. Rail covers. Color: OD Green. Fit Picatinny.

Walther Night Force Flashlight and Laser w Integral Weaver Picatinny Mount $52.95 Features: * Night Force flashlight laser combo * 6 white LED lights * Red laser (Class IIIA less than 5mw output) * 4 function switch (laser flashlight laser & flashlight and off) * Integral Weaver Picatinny spring tension mount * Windage & elevation adjustments * Weight: 0.33 lbs. * 3.75"x1.4"x1.5" * Includes 3 AAA batteries & Allen wrench

M4 Forend Grip Waterproof Battery Stash for Picatinny/Weaver (Black) $8.5 Durable Ergo vertical forend gripFits all 2.2cm Picatinny rails and most Weaver base type forendsVertical forearm grip offers better control for the operator and quick on and off attachmentAnd helps improve weapon retention and recoil controlAn aluminum mount block and hex nut clamp for clamping solidly onto the railRubber-covered grip has a ribbed, non-slip surfaceWaterproof storage compartment lets you carry spare batteries for sights and night visionWeight: 92gDimension: 130*50*35 mm

M4 Forend Grip Waterproof Battery Stash for Picatinny/Weaver (Earth) $8.5 Durable Ergo vertical forend gripFits all 2.2cm Picatinny rails and most Weaver base type forendsVertical forearm grip offers better control for the operator and quick on and off attachmentHelps improve weapon retention and recoil controlAn aluminum mount block and hex nut clamp for clamping solidly onto the railRubber-covered grip has a ribbed, non-slip surfaceWaterproof storage compartment lets you carry spare batteries for sights and night visionWeight: 92gDimension: 130*50*35 mm

Nc Star Rb35 1 In. Weaver RingBlackLow $20.25 NCStar 1 Inch Low Profile Ring Mount is made of aircraft grade aluminum and will allow you to attach any 1 inch tubed scope to a Weaver/Picatinny rail. Specifications:. Fits 1 inch Tubes. Type III Anodized MilSpec Hard Coat. NonReflective Matte Black Finish. 6061 T6 Aircraft Grade Lightweight Aluminum Construction.

Nc Star M2Rd1 1 Inch Scope Adapter With Double Weaver Base $24.3 Dual 45 Degree Offset Rail allows the attachment of Lasers Flashlights Red Dot Sights or other Tactical Accessories necessary to get the job done. Offset Canted picatinny/weaver rail design creates more mounting versatility. Perfect for night hunters. Ergonomic design gives easy access to on/off switches for Flashlights Lasers or Red Dot Sights. Constructed of solid aluminum hard anodized for corrosion resistance. Fits 1 diameter scope tubes. Length of each rail 1.25 . Flashlight laser and scope not included.

Aluminum Airsoft Gun Tactical Light W/Adjustable Picatinny/Weaver Attachment $24.88 Airsoft gun tactical light has an adjustable picatinny/weaver mount, adjustable focus, and high quality remote pressure switch. Comes with all the airsoft goodies and 2 lithium batteries too. Aluminum tactical lights will withstand the abuse of a true airsoft battle or war. Features: Triple On/Off System: Twist-On, Push-Button, and Remote Pressure Switch Deluxe Weaver Ring Adjustable Focus High Quality Pressure Switch Includes: Tactical Light Remote Pressure Switch 2 Lithium Batteries Clamp Specifications: Length: 4.75 in. Height: 1 in. See related categories of airsoft accessories , airsoft scopes , airsoft tactical lights , airsoft guns , spring airsoft guns , electric airsoft guns , and army toys for sale.

Magpul Industries MAG410BLK XTM Accessory Rail Covers Picatinny Black $22.62 The new Magpul lowprofile XTM Rail Panels are a twopiece design that attach anywhere on the rail without having to remove previouslymounted accessories. The combination of design and material used in the XTM Panels ensures they will remain securely in place under all operating conditions but may be easily removed using the tips of two rounds when necessary. Each set comes with (4) twopiece panels which will cover one side of a carbine rail. XTM Rail Panels. Finish: Black. Fits: Picatinny.

Magpul Industries MAG410FOL XTM Accessory Foliage Rail Covers Picatinny Green $22.62 Color: Foliage Green. Fit: Picatinny. Satisfaction ensured. Designed to suit any budget. Many designs available match your personal style.

3Skull Paintball or Airsoft Swivel Sling Mount Adapter - Weaver or Picatinny $15.95 Description Playing woodsball all day is tons of fun, but carrying all that gear can bog you down. The 3Skull Sling Adapter contains an adapter that mounts to the Picatinny rails of your marker and supports the use of a gun sling (sold separately). Use one adapter with a single-point sling, or two with a three-point sling.

ProMag PM138 Flip Up Front Sight for Picatinny Rail Black $91.87 The ProMag Flip Up Front Sight attaches to a front picatinny rail gas block. The ProMag Flip Up Front Sight stays out of the way until it is needed and easily flips up to the standard A2 front sight height. A spring loaded release on the ProMag Flip Up Front Sight must be depressed to place in the down position. Easy to use the ProMag Flip Up Front Sight is something you may want as an accessory to your firearm arsenal. Model: Flip Up Front Activated. Fit: Picatinny. Finish: Black. Quantity: 1.

Vortex Standard 1-Inch Rifle Scope Low Rings - Picatinny / Weaver Mount - Set Of 2 - RING-L $19.99 The Vortex Standard 1-inch Low Rifle Scope rings mount on Picatinny or Weaver type rails positioning the center of the riflescope tube at a height of 0. 63 inches (16mm) from the base. Made from aircraft-grade 6061-T6 aluminum for optimum strength.