Noh Ironogi Spotting Scopes

30mm Scope Rings

1. Measure your window width and window height or (drop), traditionally a roman blind is installed on the architrave or above the window, if installing above the window, then the roman blind should have approximately 200mm added to the height.

2. In the next step we work out how much material will be required, there is a set formula to do this for any window covering or roman blind. Use the following formula - The width of the window divided by the width of the material.

Ie... 2000mm window width divided by 1200mm material width = 1.66, this figure is telling us we require 1.6 widths of material, you always mark up from 1.6 to the next full width, ie in this case will be 2 widths.

3. We know we need 2 widths of the material, so whatever the finished drop of your blind will be, ie 2100mm you need to add 400mm onto this measurement for allowances. The finished material for your window covering will be 2 widths x 2500mm = a total of 5metres

4. Cut your material into 2 lengths of 2500mm length and sew together side by side, you should now have a piece of material 2400mm wide x 2500mm drop

5. Generally the spacing between each panel on a roman blind or roman shade is approximately 300mm, the only exception to this is the top panel which needs to be longer then all the remaining panels , this allows for the roman blind to stack up underneath the top panel.

6. Divide the height of the roman blind by 300mm = 7 panels , now we need to make sure that the top panel will be 400mm in height.

7. Turn over material and mark from the top 500mm, draw another line 30mm below that line, measure another 300mm down , draw a line, measure 30mm down draw a line and so on....

8. You will notice we have 2 lines approximately every 300mm down material , this is our sewing lines, to form our pocket for our roman blind or roman shade. Bring those 2 lines together to form a pocket and clamp with sewing clamps. Sew along these lines to form your pocket on the back of the materials. Now put a 5cm hem on the bottom of your last panel ensuring that the panel still measures 300mm.

9. Now hem the top section ensuring that the panel measures 400mm, now sew Velcro tape at top section of material and put adhesive Velcro on a timber blind. Insert battons thru pockets on back of material, attach rings on back of every second batton , horizontal spacing should be approximately 300mm.

10. Cord roman blind or roman shade to right or left side ensuring that you allow enough cord for pulling up and down. Install on window, you now have a fully functionally roman blind

Curtain Court

Leupold Standard 30mm Scope Rings - Super High Silver - 52496 $57 The Leupold Standard Rings are engineered to match up with standard 1-Piece and standard 2-Piece Bases. Although different ring heights are offered, most hunters and shooters wisely opt for rings that position the scope as low as possible.

Leupold Standard 30mm Scope Rings - Medium - Black - 49960 $57 The Leupold Standard Rings are engineered to match up with standard 1-Piece and standard 2-Piece Bases. Although different ring heights are offered, most hunters and shooters wisely opt for rings that position the scope as low as possible.

Leupold Standard 30mm Scope Rings - Medium - Black Matte - 49956 $57 The Leupold Standard Rings are engineered to match up with standard 1-Piece and standard 2-Piece Bases. Although different ring heights are offered, most hunters and shooters wisely opt for rings that position the scope as low as possible.

Vortex Precision Matched 30mm Rifle Scope Rings - High Height (1.26 Inches) - Set Of 2 - PMR-30-126 $119.99 These Vortex Precision Matched Rifle Scope Rings position the center of the riflescope tube at a height of 1. 26 inches (30mm) from the base. Sold two rings per package.

1.5-6X42,EURO-30,30MM RIFLE SCOPE W/RINGS $69.99 1.5-6X42 Euro-30 Scope -Black Matte Finish -30mm Monotube Construction -4A Illuminated Dot Reticle -Extra High Mounting Rings -1/4" MOA -Parallax-free at 100 yards -Waterproof, fogproof and shockproof -Fully coated Optics -Wider field of view -Parallax-free at 100 yards -Fast focus eyeball -Scope caps included -Limited Lifetime Warranty For big game and general hunting.

3-9X42, EURO-30 SCOPE w/ RINGS $69.99 3-9x42 Euro-30 Scope -Black Matte Finish -30mm Monotube Construction -4A Illuminated Dot Reticle -5/8" Extra High Mounting Rings -Parallax-free at 100 yards -Waterproof, fogproof and shockproof -Fully coated Optics -Wider field of view -Scope caps included -Limited Lifetime Warranty For big game and general hunting

Wheeler 409501 Scope Ring Alignment Bars#44; 30Mm $34.06 Scope Ring Alignment Bars 30mm . Manufacture ID: 409501. Proper scope installation is critical to the accuracy of your firearm. Aligning and lapping of new rings should become the standard practice whenever a scope is installed on a quality firearm. Alignment bars provide for perfect alignment of both rings and will also diagnose any misalignment problem vertical or horizontal giving you the opportunity to fix the problem before damaging the scope or experiencing frustration at the range. 30mm

GGandG GGG1384 Flt Bolt Mount with 30Mm Rings $221.13 The Special Purpose Rifle (SPR) has gained in popularity with shooters in the civilian and law enforcement community. Technical advisors advised us that the scope most often used on SPR rifles is a 30mm low powered variable optic placed forward on the AR15/M16 flattop receiver. To meet the specific optic mounting needs of the SPR shooters we have introduced new FLT Scope Mount With 30mm Integral Rings. This version of the FLT Scope Mount is a semipermanent bolt on installation using a standard squeeze rail configuration side bar and 1/2 hex nuts. Both offer forward scope mounting. For comparative purposes the SPR Scope Mount places the scope forward 1.5 inches more than the GG and G AC30 Scope Mount. The FLT Mount is lightweight weighing in at only 5.5 ounces and is 5 inches long. It is low profile allowing excellent cheek weld when mounted to the AR15/M16 flattop upper receiver. The height from the centerline of the 30mm integral rings to the top of the dovetail mounting platform is 1.460 inches. The center to center dimension of the rings is 3.750 inches. It is manufactured from 6061 T6 aluminum and Type III hard anodized matte black to milspec. Type: Mount. Color: Black. Fit: 30mm Tube.

1.25-4.5X26,EURO-30,30MM RIFLE SCOPE W/ RINGS $89.99 1.25-4.5x26 Euro-30 Scope -Black Matte Finish -30mm Monotube Construction -4A Illuminated Dot Reticle -Extra High Mounting Rings -1/4" MOA -Parallax-free at 100 yards -Waterproof, fogproof and shockproof -Fully coated Optics -Wider field of view -Parallax-free at 100 yards -Fast focus eyeball -Scope caps included -Limited Lifetime Warranty For big game and general hunting. Objective Lens 26mm Waterproof Yes Fogproof Yes Reticle 4A Exit Pupil 20.8-5.8mm Optical Coating Fully Coated Field of View (ft@100yds/m@100m) 82/27.3@1.25x, 30/10@4.5x Eye Relief 3 inch Click Value 1/4" Adjustment Knob Side adj. windage and elevation Tube Diameter 30mm Finish Black Matte Weight 15.2 oz. Length 10.8 inch Included Accessories Lens Covers, Mounting Rings and Lens Cloth Warranty Limited Lifetime Warranty

Vortex Standard 30mm Rifle Scope Low Rings - Picatinny / Weaver Mount - Set Of 2 - 30MRING-L $19.99 The Vortex Standard 30mm Low Rifle Scope rings mount on Picatinny or Weaver type rails positioning the center of the riflescope tube at a height of 0. 75 inches (19mm) from the base. Made from aircraft-grade 6061-T6 aluminum for optimum strength.

Vortex Standard 30mm Rifle Scope Medium Rings - Picatinny / Weaver Mount - Set Of 2 - 30MRNG-M $19.99 The Vortex Standard 30mm Medium Rifle Scope rings mount on Picatinny or Weaver type rails positioning the center of the riflescope tube at a height of 0. 94 inches (24mm) from the base. Made from aircraft-grade 6061-T6 aluminum for optimum strength.

Vortex Standard 30mm Rifle Scope High Rings - Picatinny / Weaver Mount - Set Of 2 - 30MRNG-H $19.99 The Vortex Standard 30mm Medium Rifle Scope rings mount on Picatinny or Weaver type rails positioning the center of the riflescope tube at a height of 1. 22 inches (31mm) from the base rail surface. Made from aircraft-grade 6061-T6 aluminum for optimum strength.

Badger 30608 30mm Scope Ring Black $231.66 Scope Standard Ring. Included torx screws. Machined from steel bar stock as serialized matched pairs. Color: Black. Fits: 30mm Rings. Hand: Left Hand. Very exquisite and beautiful design. High quality with reasonable price. Dependability and durability the best in the industry. Exceptional customer service and unparalleled product expertise. Huge selection to choose from. Ready to ship at your convenience. High quality components. Many designs available match your personal style. Satisfaction ensured.

Vector Optics Rifle Scope 2-7X 50 30mm $163 Vector Optics Super Bright Medium Range Big Game Rifle Scope 2-7X 50 30mm This is a excellent low light mid range scopes. It has an large 50mm objective for extreme low light conditions. This scope makes an exceptional close and mid range big game hunting scope. Specifications: - Magnum Proof for use with heavy recoil - Finger adjustable cross hairs - Magnification: 2-7 - Objective Lens: Adjustable 50mm - Length: 13 inches - Tube Diameter 30mm monotube - Eye Relief: 3. 5 to 4. 5 inches - Coating: Fully-Multi Coated to eliminate glare and maximize light transmission - Nitrogen-purged - 99. 99 Shock proof, water proof and fog proof - High-durability aluminum alloy with black matte - 1/4 M. O. A direct high finger windage and elevation adjustments - Duplex reticle, Illuminated - Diopter adjustment can be made without effect zero - 3 inch Sun shade included - 30mm Weaver style rings included - Pop open lens covers included - This item must ship UPS

Leupold Mark 4 Scope Rings - 30mm - Medium - Black Matte - 57398 $224 The Leupold Mark 4 Scope Ring mounts are precision machined from aircraft-grade aluminum to provide the necessary strength and recoil resistance, while not adding excess weight to the rifle.

Tipton 305172 1 in. and 30Mm Wheeler Scope Ring Alignment and Lapping Kit $87.01 Aligning and lapping of new rings should become the standard practice whenever a scope is installed on a quality firearm. The alignment bars in this kit provide for perfect alignment of both rings and will also diagnose any misalignment problem vertical or horizontal giving you the opportunity to fix the problem before damaging the scope or experiencing frustration at the range. The lapping bar is used to lap the rings to improve alignment reduce stress on the scope and improve the grip of the rings on the scope. It also serves as a lever to rotate dovetail rings into place. Lapping the rings can also minimize or prevent ring marring of the scope. Kit includes:. Two 1 alignment bars. Two 30mm alignment bars. 1 lapping bar. 30mm lapping bar. Lapping bar handle. 220 grit lapping compound. Complete instructions.

Burris 30mm Zee Rings, Medium Black Matte $61.36 Burris rings and bases have long been favorites of custom gunmakers because of their strength, beauty and fit. It s easy to recognize Burris leadership role in scope mounting systems when you consider the myriad of innovative designs and manufacturing processes that result in rock-solid performance. Each ring is made from a solid piece of steel with the top and bottom half perfectly mated. Zee rings with no moving parts are the best fitting and most positive gripping Weaver-style ring made. 30mm Zee Rings, Medium, Matte

Leupold Quick Release 30mm Extension Scope Rings - High - Black - 49940 $80 The Leupold Quick Release Extension Rings allow you to shorten or lengthen your ring spacing on rifles. A common application is on firearms with long actions, where the normal 4-inch ring spacing is not possible. But whether you are lengthening or shortening the ring spacing, Leupolds extension rings allow you 5/8-inch of adjustment.

Leupold Standard 30mm Extension Scope Rings - Medium - Black Matte - 51034 $79 The Leupold Standard Extension Rings allow you to shorten or lengthen your ring spacing on rifles. A common application is on firearms with long actions, where the normal 4-inch ring spacing is not possible. But, whether you are lengthening or shortening the ring spacing, Leupolds extension rings allow you 5/8-inch of adjustment.

30MM HIGH WEAVER STYLE RINGS BLACK MATTE $8.99 These 30mm scope rings are an excellent choice for price-conscious shooters. Manufactured using T6 Aluminum and Aluminum Alloy to withstand brutal recoil and provide rock solid gripping power and protection with superior structural integrity. Like our riflescopes, these rings will provide you with extraordinary performance without sacrificing quality, accuracy or your bank account!

30MM RINGS, X-HIGH WEAVER STYLE, BLACK $8.99 These 30mm scope rings are an excellent choice for price-conscious shooters. Manufactured using T6 Aluminum and Aluminum Alloy to withstand brutal recoil and provide rock solid gripping power and protection with superior structural integrity. Like our riflescopes, these rings will provide you with extraordinary performance without sacrificing quality, accuracy or your bank account!

Leupold Weaver-Style 30mm Scope Rings - Low - Black Matte - 49861 $108 Leupold Weaver-Style Rings are engineered to retrofit any existing cross-slot base, thus converting existing mount bases into a quick-detach system. However, for the kind of fail-safe, return-to-zero performance thats typical of Leupold Detachable Accuracy Mounts, they recommend that your team Leupold Weaver-Style rings with Leupold Weaver-Style bases.

Bill Hicks SUN SM066 Sun 30Mm High Rings Black Matte $30.82 Rings will fit Weaver style scope bases. Size: 30mm ring High. Color: Matte Black. Huge selection to choose from. Satisfaction ensured. High quality components.

Millett AL00716 Rings AngleLoc 30Mm Low Black Matte Weaver Style $47.11 Type: Angleloc scope rings. Height: Low.325. Finish: Smooth matte. Tube Size: 30mm. Material: Heat treated nickel steel. Other Features: Windage adjustable weaver style.

Burris 30mm Zee Rings, High Black Matte $61.36 Burris rings and bases have long been favorites of custom gunmakers because of their strength, beauty and fit. It s easy to recognize Burris leadership role in scope mounting systems when you consider the myriad of innovative designs and manufacturing processes that result in rock-solid performance. Each ring is made from a solid piece of steel with the top and bottom half perfectly mated. Zee rings with no moving parts are the best fitting and most positive gripping Weaver-style ring made. 30mm Zee Rings, High, Black Matte

Bill Hicks MILLET AL00717 Millet Rings Weaver 30Mm Med Matte $46.37 MILLETT 30mm AngleLoc Rings The AngleLoc windage adjustable scope mount system is the most significant improvement to the traditional WeaverStyle mount in many years. All components are made of heat treated nickel steel for rock solid durability. Height: Medium. Tube Diameter: 30mm. Finish: Matte Black.

Bill Hicks MILLET AL00718 Millet Rings Weaver 30Mm High Matte $46.37 MILLETT 30mm AngleLoc Rings The AngleLoc windage adjustable scope mount system is the most significant improvement to the traditional WeaverStyle mount in many years. All components are made of heat treated nickel steel for rock solid durability. Height: High. Tube Diameter: 30mm. Finish: Matte Black.

Bill Hicks MILLET AL00017 Millet Rings Weaver 30Mm Med Gloss $46.37 MILLETT 30mm AngleLoc Rings The AngleLoc windage adjustable scope mount system is the most significant improvement to the traditional WeaverStyle mount in many years. All components are made of heat treated nickel steel for rock solid durability. Height: Medium. Tube Diameter: 30mm. Finish: Black.

Vortex Precision Matched 30mm Rifle Scope Rings - Low Height (.87 Inches) - Set Of 2 - PMR-30-87 $119.99 These Vortex Precision Matched Rifle Scope Rings position the center of the riflescope tube at a height of 0. 87 inches (22. 1mm) from the base. Sold two rings per package.

Vortex Precision Matched 30mm Rifle Scope Rings - Medium Height (.97 Inches) - Set Of 2 - PMR-30-97 $119.99 These Vortex Precision Matched Rilfe Scope Rings position the center of the riflescope tube at a height of 0. 97 inches (24. 64mm) from the base. Sold two rings per package.

ProMag PM067A Mount 30mm Ar15 Flat Top Scope Black $68.6 The scope mount allows attachment of a 30mm diameter tube scope to the rifle. The mount ensures proper scope height without the need for extra high rings. The mount is quick detachable held in place by a full L spring loaded locking bar with two thumb screws. Constructed of hard anodized aircraft grade aluminum. Color: Black. Fits: AR15. Size: 30 mm.

Warne Scope Mounts M615M Tactical Ring 30mm High Matte $128.78 Super sturdy all steel rings feature 6 cross bolts to lock your scope down tight. The unique vertical design offers an increased level of rigidity for dependable performance even under the harshest conditions. These rings fit any Weaver style base. Height: High. Tube Diameter: 30mm. Finish: Matte Black.

Millett AL00717 Rings AngleLoc 30Mm Medium Black Matte Weaver $47.11 The angle loc windage adjustable scope mount system is the most significant improvement to the traditional Weaver style mount in many years. All components are made of heat treated nickel steel for rock solid durability. Type: AngleLoc Rings. Tube Diameter: 30mm. Finish: Matte Black.

Millett AL00017 Rings AngleLoc 30Mm Medium Black Weaver Style $47.11 The angle loc windage adjustable scope mount system is the most significant improvement to the traditional Weaver style mount in many years. All components are made of heat treated nickel steel for rock solid durability. Type: AngleLoc Rings. Height: Medium. Tube Diameter: 30mm. Finish: Black.

Millett AL00018 Rings AngleLoc 30Mm High Black Weaver Style $47.11 The angle loc windage adjustable scope mount system is the most significant improvement to the traditional Weaver style mount in many years. All components are made of heat treated nickel steel for rock solid durability. Type: AngleLoc Rings. Tube Diameter: 30mm. Finish: Black.

Leupold 49956 Standard 30mm Rings Medium Matte Black $51.51 Leupold Standard STD Rings are engineered to match up with STD 1Piece and STD 2Piece Bases. Although we offer five different ring heights most hunters and shooters wisely opt for rings that position the scope as low as possible. Leupold STD Extension Ring Sets give you 5/8 of additional ring spacing adjustment so you can shorten or lengthen your ring spacing on rifles. Extension rings from Leupold that mount on the front of STD and QR bases are available for 1inch 26mm (QR only) and 30mm maintubes. 30mm Rings. Size: Medium. Color: Matte Black.

Leupold Quick Release 30mm Scope Rings - Medium - Black - 49930 $60 The Leupold Quick Release Ring Mount promises repeatable accuracy. Super-close machining tolerances are at the heart of this patented lever mechanism. By turning the lever forward, an eccentric on the lever shaft engages the base of the ring. This pulls the ring down and forward on the base, locking it solidly into its zero position.

Leupold Quick Release 30mm Scope Rings - High - Silver - 57527 $60 The Leupold Quick Release Ring Mount promises repeatable accuracy. Super-close machining tolerances are at the heart of this patented lever mechanism. By turning the lever forward, an eccentric on the lever shaft engages the base of the ring. This pulls the ring down and forward on the base, locking it solidly into its zero position.

Leupold Quick Release 30mm Scope Rings - Low - Black Matte - 51717 $60 The Leupold Quick Release Ring Mount promises repeatable accuracy. Super-close machining tolerances are at the heart of this patented lever mechanism. By turning the lever forward, an eccentric on the lever shaft engages the base of the ring. This pulls the ring down and forward on the base, locking it solidly into its zero position.

Bill Hicks MILLET TP00710 MILLET RINGS 30MM 22CAL MED MATTE $25.49 Millett AngleLoc Detachable rings are designed for use with a 3/8 grooved receiver base. These rings have all excess weight removed to provide a slim ring that will look great on any rifle. The AngleLoc mounting system provides a rock solid mount and the rings can be removed with the included Allen wrench. Material: Aluminum. Style: 3/8 dovetail. Ring Diameter: 30mm. Ring Height: .235 (measured from base of ring to bottom of scope tube).